User manual IOGEAR GUWH104

[. . . ] Switch 2 (S2) Top View: The default and recommended setting is to operate in Auto Association mode. In this mode, the Wireless USB Hub will automatically connect to the Wireless USB Host Adapter. The Host Selection button is used in Manual Association mode. This mode is only needed if your Wireless USB Hub has already been successfully associated with more than one Wireless USB Host Adapter-PC combination. [. . . ] Select "Finish" to finalize the driver installation. 15 Driver Installation Follow the instructions included with the PC or the manufacturer of the Wireless USB Host Adapter for software and driver installation. Once the IOGEAR Wireless USB Hub has been associated and then connects wirelessly, the driver will be installed automatically. 16 Frequently Asked Questions 1. Problem: No LEDs lighting up on the Wireless USB Hub. Solution: Check the power supply's connection to the Wireless USB Hub. Problem: LED does not light up after inserting a USB device into a peripheral port on the Wireless USB Hub. Solution: Remove the Wireless USB Host Adapter from the PC and disconnect the power supply from the Wireless USB Hub. Re-insert the Wireless USB Host Adapter and reconnect power to the Wireless USB Hub. Problem: Host LED blinking on the Wireless USB Hub. Solution: Remove the Wireless USB Host Adapter from the PC and disconnect the power supply from the Wireless USB Hub. Re-insert Wireless USB Host Adapter, connect the power supply to the Wireless USB Hub and wait for the wireless connection. Problem: Certain USB devices will not work with the Wireless USB Hub. Solution: Verify that the USB device has the ability to operate when connected to a hub of any kind by checking with the product documentation. If the USB device does not have the functionality to operate with a wired hub, then it will not work with the Wireless USB Hub. Also, verify that the latest drivers for the product are being used by going to the manufacturer's website and downloading the most up-to-date drivers. 17 3. 4. 5. Problem: USB web-cameras, USB speakers, or Bluetooth devices do not work with the Wireless USB Hub. Solution: Isochronous products such as USB web-cameras, USB speakers, and Bluetooth devices are not currently supported. Problem: USB printer has loaded drivers correctly when connected to the Wireless USB Hub, however, nothing will print. Solution: Verify that the latest software has already been installed on the PC from the product website. If the printer was installed previously when connected directly to the PC, the printer was installed as "Model Name". When the printer driver is installed when connecting to the Wireless USB Hub, the printer is installed as a "Model Name (Copy 1)". If the printer was never directly connected to the PC and drivers were never installed, when it is connected to the Wireless USB Hub, the printer will install as "Model Name" when installing the printer drivers. When printing to the printer when it is connected to the Wireless USB Hub, verify that the correct printer is being selected in the printer options window by selecting the correct model name to print to. 6. 18 7. Problem: The throughput of USB Hard Drive or USB Flash drive is less when plugged in the Wireless USB Hub than when plugged directly to the PC. [. . . ] Microsoft and Windows are registered trademarks of Microsoft Corporation. All other brand and product names are trademarks or registered trademarks of their respective holders. IOGEAR makes no warranty of any kind with regards to the information presented in this document. All information furnished here is for informational purposes only and is subject to change without notice. [. . . ]