User manual ION FILM 2 SD PRO

[. . . ] Be sure the latch and sides of the holder are securely in place. Only push the holder through the FILM HOLDER SLOT in the direction of the arrow (from right to left). * * To change move to the next picture when using the Roll Film Holder, slide the film itself through the holder (while the holder is inserted in FILM2SD's FILM HOLDER SLOT). Note: If the image is scanned upside down or mirrored, you can also correct this by using the FLIP or MIRROR buttons later. [. . . ] To eject your SD card from the SD CARD SLOT, push it in first, then pull it out of the slot. Now you can insert it into an SD-compatible device, such as a digital picture frame, computer or television, to view your pictures. If you want to transfer your image(s) directly to your computer from FILM2SD, connect FILM2SD to your computer with the included USB cable and select the USB icon (USB Mode) from the Main Menu to establish the connection. fILM2SD will appear as a removable device in "My Computer" (Windows) or on your Desktop (Mac). Once the connection has been established, you can copy the images to your computer by dragging the image files to your hard drive. Note: While FILM2SD is in USB Mode, you will not be able to scan other pictures. To enable scanning again, turn off FILM2SD, then turn it on again and enter Capture Mode. Note: To view your images on your TV instead of FILM2SD's DISPLAY, connect FILM2SD's TV OUTPUT to your TV's video input with the included TV output cable. 3 OPERATION & FEATURES When viewing any menus with multiple options, you can use the UP / MIRROR and DOWN / FLIP buttons to move through them and press the OK button to select one. FILM2SD will enter Capture Mode automatically if no 1 buttons are pressed for five seconds. Playback Mode: Allows you to view your images. Film Type: Select the kind of film you are using. USB Mode: Allows you to transfer your images to a 4 connected computer via USB. Once your images are on your computer, you can view and edit them as you wish. If there is no SD card in the SD Card Slot, a “? ” icon will appear on the screen. Capture Mode When in Capture Mode, a red indicator in the upper left-hand corner will indicate FILM2SD is viewing the image in the film holder. Once an image is captured, you will see the following menu options: 1. Cancel: Cancels editing without saving the 4 5 image to the SD card. After selecting Save or Cancel, you can move the film holder to the next image you want to capture. [. . . ] 5 Film Type Here, select the type of film you have placed in the film holder. Black & White Negative 1 2 3 USB Mode USB Mode allows you to transfer images from your SD card directly to your computer. While in USB Mode, FILM2SD becomes an SD card reader for your computer. To enter USB mode, connect FILM2SD to your computer’s USB port with the included USB cable. [. . . ]