User manual IRIVER H100

[. . . ] Instruction Manual PORTABLE STORAGE DEVICE & MULTI - CODEC JUKE BOX Model iHP-100 Series Model iHP-100 Series Thank you for your purchase. Please read this manual carefully before using your new player. http://www. iRiverAmerica. com http://www. iRiverAmerica. com THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE, RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. [. . . ] In case DB file is not, new DB file (iRivNavi. iDB) is created. After disconnecting the player from the host PC, you can search the added music by using ID3 Tag. (Refer to "Disconnecting the player from the Host PC", page 13. ) 24 25 OPERATING THE FM TUNER While playing an Audio File, Press and hold the PLAY/PAUSE button. Memory Function (Save stations manually) Select a station by pushing the or switch to the left or the right. The FM function picture displays on the LCD. Push the or button to select FM frequency. Push or and select the desired station to save the station to. again Save complete Select CH02 will exit the memory function without saving. Press the STEREO/PLAY/PAUSE button to select Stereo/Mono. Selecting Frequency To change frequency, push the or Auto Scan function: To select a station to store, press the NAVI/MENU button to exit Preset mode and find a station by using or . Exit Preset Up to 20 stations can be stored. or switch to the left or the right. Auto Memory Function (Save stations automatically) Automatically select station and save them in sequential order. Press the NAVI/MENU button to exit the Preset mode. or PRESET Mode : To select a station saved in memory, press the NAVI/MENU button or switch. Select a stored station by using the Press and hold the A-B/MODE button. Up to 20 stations will be stored in channels 1~20 automatically. Note: The Auto Memory Function may not function well in weak transmission areas. 26 27 Memory delete function (Delete saved channels) Select the channel to be deleted at preset mode. Press and hold the memory button. Recording Press the REC button to activate recording standby mode. - The next channel will appear when channel deletion is completed. Push the MEMORY button if you want to delete the next channel also. FM Tuner reception may vary in different areas. While in Preset mode, Auto Scan and Auto Memory functions are not available. When the player does not have any preset channels, EMPTY will be blinking at preset mode. Press A-B/MODE button or push the REC switch toward SOURCE/TYPE to select the source to record - To record voice : MICROPHONE - To record from an external audio device with an Optical Out: OPTICAL. - To record from an external audio device with a standard Line Out or Headphone jack: LINE-IN Connecting the player to external audio equipment Connect the stereo cable to the LINE IN jack on the iHP-100 Series and to the LINE OUT or Headphone jack of an external audio device. If the external audio device has an Optical output, connect an Optical cable to the Optical Out jack on the external device and to the Optical In jack on the iHP100 Series. Push the MENU/NAVI handle toward or , or push the REC button on the remote control toward SOURCE/TYPE to select FILE TYPE to save. 28 29 Push the MENU/NAVI handle toward or , or push the REC button on the remote control toward BITRATE to select BITRATE TYPE to set recording quality. This is only for MP3 file. To pause recording Press REC button to pause recording, press REC button again to start recording. To stop recording At recording standby mode, press and hold mode. button to go previous When saving as WAV file, the Bitrate is 1411Kbps. (44. 1 KHz, 16Bit, Stereo) Push the REC button to start recording. When recording from an external audio device, be sure to start the playback on that device when recording on to the iHP-100 Series. Recorded files are stored in folders matching the source name from where the audio was recorded. - Line In : ROOT\RECORD\AUDIO\AUDIOXXX. MP3(WAV) - Mic In : ROOT\RECORD\VOICE\VOICEXXX. MP3(WAV) NOTE Volume level can not be controlled on the iHP-100 Series while recording from an external device. While recording, press (STOP/PWR OFF) to stop recording and switch to recording standby mode. Press the REC button again to begin recording to a new file. Recording is automatically stopped if: - The iHP-100 Series's memory is full. - When the recorded MP3 file size is over 195MB - When the recorded WAV file size is over 795MB - The recorded time is longer than 5 hours. - The battery is low. To play the recorded file Press button to play the recorded file at the recording standby mode. 30 31 The iHP-100 Series has various playback modes. [. . . ] The headphone cord functions as the antenna, they must be plugged in for best reception. Check the connection between your computer and the player to ensure that the cable is secure. Check the operation after connecting AC Adapter. Check whether the adapter plug is properly connected. [. . . ]