User manual IRIVER IMP-450

[. . . ] User Manual MULTI - CODEC CD PLAYER/FM TUNER Model SlimX 450 Model iMP-350 Model SlimX 450 Thank you for purchasing the product. Please read the manual carefully before use. http://www. iRiver. com http://www. iRiver. com THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE, RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. [. . . ] iRiver provides you with the latest and best features through Firmware Upgrade. Visit www. iRiver. com to upgrade your Firmware. Download the latest firmware upgrade file from www. iRiver. com. Burn the SlimX 450 HEX file to a CD (be sure there are no other files on this CD. Connect the power adapter to the SlimX 450. (Note : Upgrade the firmware after connecting the adapter) 5. Insert the CD into the SlimX 450 and play the CD. Check whether your LCD window shows "Firmware Upgrade" 7. When the power goes off automatically, the upgrade is done. Play your Music Disc and confirm the firmware version information displayed during loading. 32 If you select "ON" on the MENU GENERAL Password, the right screen is displayed after loading screen when you turn the player on. Press , to move the numeral and press the PLAY or NAVI button to select it. The screen as below is displayed. When the input password is correct, the above screen is disappeared and changed to Total screen. Press the PLAY button to start the playback. - If the password is wrong, the screen goes back to the input screen. CAUTION! - The Password must input as 4 digits. - The Password is initialized as "0000" when the firmware is upgraded. 33 Changing the Password Select "CHANGE" on the "MENU GENERAL Password". (The initial password is "0000") USING WINAMP PLAYLIST Make a PLAYLIST ( . M3U) using WINAMP. Note : WINAMP software is not included with the player. Launch WINAMP and add songs to make a list. 2. Click "LIST OPTS" located on the right bottom and click "SAVE LIST". Input the new password of 4 digits. Input the new password of 4 digits to confirm once more. Click the SAVE LIST button. Name the file name (ex: iriver. m3u) and click "SAVE" to save the list. NOTE If the password to change and the password to confirm are the same, the password is automatically changed to the new one and the playback screen is displayed on the LCD. If you select "ON" on the password menu, you must input the new password to turn on the player. If the password to confirm is different from the changed password, the password screen goes back to the Confirm screen. [. . . ] of Channels STEREO(L+R) FM Frequency range 87. 5MHz~108MHz 12mW(L) +12mW(R) at 16 Headphone Output 8mW(L) + 8mW(R) at 32 Audio Max. Volume (FM TUNER) Line output level 0. 76V rms(47K ) Max. Volume S/N ratio 50dB Antenna Headphone/Earphone-Cord Antenna CD-DA, CD-Text(8cm / 12cm) CD Type CD-ROM Mode 1, Mode 2 Form1 Enhanced CD, Mixed CD CD Support Packet Write, ISO9660, Joliet, Romeo, CD-R/RW Readability Multi-Session File TYPE MPEG 1/2/2. 5 Layer 3, WMA , ASF 8Kbps ~ 320 Kbps File Support Bit Rate Tag ID3 VI , ID3 V2 2. 0, ID3 V2 3. 0 DC 4. 5V , 600mA Power Supply AC Adapter Dimension Approx. 130. 5(W) x 140(D) x 16. 7(H)mm Weight Approx. [. . . ]