User manual IRIVER STORY

[. . . ] Provides product registration that enables user to get online customer service. You can receive the newest information, firmware upgrade notice, etc. via newsletters by registering your e-mail address. UNIQUE FEATURES OF IMP-50 Multi-Codec CD Player : Supporting MP3, WMA, and ASF format as well as standard Audio CD. Firmware Upgrade : Provides the latest updated features via firmware upgrade. [. . . ] INTRO HIGHLIGHT plays the first 10 seconds from the spot 1 minute was played for each track in sequential order. STUDY MODE(LANGUAGE STUDY) : 5 SEC / 10 SEC: When you press STOP, it goes back 5 or 10 seconds. BEEP: When BEEP is ON, it beeps whenever you press the button. MODE + + + + F. scan OFF F. skip ON speed HIGHLIGHT ON scroll INTRO MODE Upgrade your firmware at www. iRiver. com How to UPGRADE? 1. Download the latest firmware upgrade file from www. iRiver. com. Make upgrade disc containing the IMP-50. hex file. Insert the CD into the iMP-50 and play the CD. Check whether your LCD window shows "Firmware Upgrade" 7. When the power goes off automatically, the upgrade is done. Play your Music Disc and confirm the firmware version information displayed during loading. The saved text is displayed during initial loading of disc and at stop mode during play. When initial loading What is FIRMWARE? : It is the operating system that works in the iMP-50. iRiver provides you with the latest and best features through Firmware Upgrade. For optimum playback time, Alkaline batteries are recommended. CAUTION! Do not mix rechargeable batteries with dry batteries. Do not use different types of batteries together. When the batteries are not to be used for a long time, remove them. If electrolyte leaks, wipe off any residue in the battery compartment and insert new batteries. 27 28 FAQ RECORDING How do I download MP3 files?You need to record MP3 files onto a CD-R or CD-RW disc to play in the iMP-50 player. In general, there are two kinds of blank CDs. CD-R (CD Recordable): Recordable but not reusable. CD-RW (CD-ReWriteable) : Recordable and can be used again after erasing. A CD is burned into session unit (the data is stored from the center of the CD). FAQ How do I make a CD from a Language Study tape?To convert the tape's information into CD requires many items, including: Sound Edit program (Goldwave, Cooledit), stereo cable to connect each side, and a player to play the Tape. Connect Stereo cable to earphone output on the player and Line in socket of Computer Sound Card or Mic socket; then record the sound using the Sound Edit Program. [. . . ] If you experience a ringing in your ears, reduce volume or discontinue use. Consideration for others Keep the volume at a moderate level. This will allow you to hear outside sound and to be considerate of the people around you. CD-TEXT discs are displayed with track names within the TOC (Table of contents) of the disc. Battery indicator may varies depending on battery type. [. . . ]