User manual IRIVER T9

[. . . ] DESIGN BY IRIVER T9 USER GUIDE CONTENTS 01 Getting Started Components Locating the Controls Power Management Connecting the Product Using iriver plus 4 03 03 03 05 06 08 Other Information Important Safety Information 21 Troubleshooting Copyrights Certification Registered Trademark Exemption 22 23 24 24 24 02 Using T9 Home Screen MUSIC FITNESS RADIO REC BROWSER SETTING 11 12 14 15 17 18 19 Components Components may be changed without prior notice for improvement of product performance or quality. T9 Earphones Quick Start Guide & Product warranty Earphones: Connect this to the product to output sound. Quick Start Guide: Explains how to use our device. Product Warranty: Please keep this in a safe place for use during any warranty repairs. Locating the Controls The exterior and the contents printed or engraved may differ by model or according to the name of each part. Earphones Jack MIC Power RESET Key Necklace Connection Loop 03 Getting Started Up LCD Left Right USB Port Volume + Volume - Down USB Slide Earphone Jack: Connect earphone here. [. . . ] If you press [Left], the FITNESS mode will stop. 14 Using T9 While activating the FITNESS feature you can use MUSIC or Radio features in the multitasking mode. RADIO Executing Radio 1. If you select [RADIO] in the home screen, the last-selected radio frequency will be received. Select a radio frequency by pressing [Up/Down]. While listening to the radio, the earphones serve as its antenna. If you use other earphones, the reception rate might be deteriorated. ) Listening to Radio - Control the volume while listening by pressing the [ + / - ] button. - Set the preset on or off by pressing [Right] while listening. - Move to a higher or lower frequency signal by setting the preset off and pressing [Up/Down]. - Move to a higher or lower frequency signal that is receivable by setting the preset off and pressing and holding [Up/Down]. - Move to a higher or lower preset channel by setting the preset and pressing [Up/Down]. Using Switching Mode In the Radio menu, if you rotate the direction of player 180 degree, the REC Mode can be activated. - While listening to the radio, press [Right] to record the broadcast you are listening. If you press it again, recording will be terminated and the recorded file will be saved. While using Hold function, the switiching mode is not available. 15 Using T9 LCD Radio Display Channel Number PRESET Battery Radio Frequency Band Receiving Radio Frequency Additional Features 1. The list of additional features are displayed when pressing and holding [Right] while listening. Press the [Up/Down] button to select the additional feature and press the [Right] button to display the window for setting it up. Press the [Up/Down] button to set the feature up and press the [Right] button to save / operate it. - Recording: Record the radio broadcast while listening. Select [Recording] to move to the recording standby screen. Press the [Right] button to start recording. If you press it again, recording will be terminated and the recorded file will be saved. - FM Saved Recordings: Display the list of radio recordings. Press the [Right] button to play the selected file. - Save /Delete Preset: Save or delete the frequency signal being received currently to a channel. - Auto Preset: Scan the frequency signals that are receivable and automatically save them to channels. - Preset List: Display the list of channels stored. [. . . ] + It takes a long time to reboot the player. - Please check if you have saved too many files in the device. If there are too many files saved in the device, the time it takes to reboot may be long. + Files are not replayed or some file images are blurry. [. . . ]