User manual IROBOT ROOMBA 630

[. . . ] You’ve joined the millions of people who clean with robots the smarter way to get it done. Please take a few moments to read this manual and get acquainted with your Roomba, to get the best performance from your robot. If you have any questions, visit our website at www. Register your robot to instantly activate your warranty and enjoy these exclusive benefits: • Take advantage of iRobot’s award-winning customer service Get support tailored to your specific robot, including answers to questions, maintenance tips, video demos, live chat and more. [. . . ] The lights on the Command Center will flash to indicate the pairing has completed, and Roomba will make a two-tone beep. Flash in sequence from left to right until Roomba is under control. IRobot Roomba 500 Series 8 When the Command Center is powered on from now on, the lights will 18 Remote Control (optional accessory for selected models) SPOT Button CLEAN/Power Button Directional Buttons . button The Remote Control lets you conveniently control Roomba’s functions. You can use it to turn Roomba on and off and steer it around your room without bending down. It also gives you remote access to these commands: SPOT Roomba spirals approximately three feet in diameter and then spirals back to where it started, intensely cleaning a local area. Roomba automatically calculates the room size and adjusts its cleaning time appropriately. Models 600+ Before using your remote for the first time, install 2 AA batteries (not included). TIP: Check that there is a direct line of sight from the Remote Control to  Roomba and that the remote is pointed at Roomba. t  he Remote Control , Virtual Walls and Home Base operate using an invisible infrared beam. If they are all used in the same area, Roomba may see multiple infrared signals and will not operate. The Remote WILL NOT work when Roomba is near Virtual Walls. Com 19 Scheduling Roomba (Models 550 and above) Setting the Time You must set the time before scheduling Roomba to clean. While holding CLOCK, use the DAY, HOUR, 2  3  Release CLOCK. Setting a Schedule You can schedule Roomba to clean once per day, up to seven times per week. You must set the time before setting a schedule. to set a schedule: 1 Press and hold SCHEDULE. While holding SCHEDULE, use the DAY, 2  HOUR, and MINUTE buttons to set the schedule. While holding SCHEDULE, press the DAY 2  button to cycle through Roomba’s scheduled cleaning times. Cleaning time you’d like to delete, press and hold DAY to delete the scheduled cleaning time. While holding SCHEDULE, press the DAY 2  3  When Roomba is displaying the scheduled 4  Release SCHEDULE. Cleaning time you’d like to change, press the HOUR and MINUTE buttons to change the scheduled cleaning time. [. . . ] ROOMBA USE RESTRICTIONS • Roomba is for indoor use only. Small children and pets should be supervised when Roomba is cleaning. €¢ Clean with a dry cloth only. €¢ Do not use this device to pick up anything that is burning or smoking. [. . . ]