User manual IROX ER XL

[. . . ] IROX-ER + IROX-XL Bedienungsanleitung Mode d emploi Modo di uso User manual TABLE OF CONTENTS 1. SERVICE page 94 page 96 page 98 page 99 page 102 page 106 page 110 page 112 page 113 page 117 page 119 page 122 93 IROX-ER IROX-XL 1 INTRODUCTION This device is a digital product that provides altimeter, barometer, compass, altimeter data, dual time, chronograph, chronograph data and alarm functions. Features: Altimeter ­ 1 meter (or foot) resolution and with working range from ­700 meters (-296 feet) to 9000 meters (29520 feet). ­ Graphical expression of changes provided. [. . . ] * Graph will be cleared only after battery replacement or reset. ­ Weather forecast (indicated by the weather indicators) for the coming 24-48 hours is provided. * Forecast is accurate only if the barometer has been functioning for at least 12 hours. 106 ­ Temperature is of 0. 1 degree resolution and with working range from ­4°F (­20°C) to 158°F (70°C). And unit in °F or °C selectable. ­ There are 3 displays for Barometer mode. To switch among the 3 displays for barometer mode Use A or E to switch among the 3 displays for barometer mode. A or E A or E A or E PM Indicator Temperature Absolute pressure Time Reading the graph of sea level pressure The graph shows the relative changes in sea level pressure in the past with the current pressure represented on the right. Each horizontal point represents one hour while each vertical point represents the relative reading of pressure in that time. 107 * It is not possible to get the exact reading from the graph. User can only get the trend of changes from the graph. Use A or E to switch to the barometer display with temperature. Hold down B until the unit indicator (°F or °C) stops flashing to switch temperature between °F and °C. Hold down D until "SET CURRENT WEATHER" scrolls on the display, which indicates the weather setting screen. * The weather indicators start to flash. Press C, "SET SEA LEVEL PRESSURE" scrolls on the display, which indicates reading setting screen. * The current sea level pressure reading starts to flash. Use A (+) and B (­) to change the setting. Holding down either button scrolls the setting at high speed. * If there is no button operation for 2-3 minutes at setting screen, the display will return to Barometer mode automatically. 108 To set current weather 1. Hold down D until "SET CURRENT WEATHER" scrolls on the display, which indicates the weather setting screen. * The weather indicators start to flash. Use A (+) and B (­) to change the setting as in the following: A A A A B B B B 3. * If there is no button operation for 2-3 minutes at setting screen, the display will return to Barometer mode automatically. 109 7 ALTIMETER MODE Altitude graph Unit indicator of altitude Current Altitude reading Time Altimeter mode indicator Use C to enter Altimeter mode. * Mode prompt "ALTI" is displayed first. [. . . ] To clear all runs Hold down D until "----" is shown on the display. * All runs are cleared. 118 11 ALARM MODE T1 indicator Alarm 1 indicator Alarm time ON/OFF status indicator Chime on indicator Alarm on indicator Use C to enter Alarm mode. * Mode prompt "ALRM" is displayed first. ­ There are 2 daily alarms and they can be set to refer to Normal Time (indicated by T1) or Dual Time (indicated by T2). [. . . ]