User manual IROX JKR-1

[. . . ] Using a wireless remote thermo-sensor, it can simultaneously monitor temperatures in three remote locations. The unit will show temperature trends and record maximum and minimum temperature readings. As part of the weather forecasting function, a built-in barometer that displays atmospheric pressure. Using graphic illustrations the unit displays atmospheric pressure trends and displays forecasts as sunny, partly cloudy, cloudy, and rainy. [. . . ] Position the remote unit and the main unit within effective transmission range. In usual circumstances, the effective range is 30 meters. Though the remote unit is weather proof, it should be placed away form direct sunlight, rain or snow. Note that once a channel is assigned to a remote unit, you can only change it by removing the batteries or resetting the unit. BATTERY INSTALLATION: MAIN UNIT 1. Gently lift the tab on the battery compartment door. Insert four UM-3 or " AA" size alkaline batteries. 4 JKR-1os-tech_ENoutput 5 04/25/2005, 11:33 EN EN When the reception is complete, the RADIO RECEPTION signal will stop blinking. The strength of the reception for the last full hour will be indicated. For better reception, place the clock away from metal objects and electrical appliances to minimize interference. Should you wish to deactivate the RF controlled function, press MODE and DOWN( ) button simultaneously. To reactivate the RF control function, press MODE and UP( simultaneously. The unit provides an option that allows either the day or the month to be indicated first. Using the UP( ) or DOWN( ) button, select whether the calendar reads as: Day/Month; or Month/Day. Language English German French Italy Spanish Monday Tuesday Wednesday Thusday Friday Saturday Sunday Proceeding from the clock display: Press MODE again and the language setting will flash. Use the UP( ) or DOWN( ) button to select E for English, I for Italian, D for German, F for French, or S for Spanish. Day / Month Press MODE again to confirm and exit. Month / Day 6 JKR-1os-tech_ENoutput 7 04/25/2005, 11:33 EN EN HOW TO SET AND ACTIVATE THE ALARM 1. To set the Alarm Press ALARM button to display the alarm time. Press ALARM and hold for three seconds, the value for the hour setting will flash. Press UP( ) or DOWN( alarm hour setting. ) buttons to make changes to the CHECKING INDOOR AND REMOTE SENSOR TEMPERATURES The indoor temperature readings, and indoor temperature maximum/minimum indicator are all part of the INDOOR TEMPERATURE window. The OUTDOOR temperature window displays remote sensor temperatures, maximum and minimum temperatures and outdoor temperature trends. This window also displays the remote sensor channels and a remote sensor battery low [ ] icon. [. . . ] Without interruption, the unit will alarm for two minutes. 7 JKR-1os-tech_ENoutput 8 04/25/2005, 11:33 NOTE ON SETTING REMOTE SENSOR CHANNELS The unit has an auto-scan function that sequentially displays temperature readings of three remote sensors. To activate this function, press and hold the [channel] button for 3 seconds. To deactivate press the [channel] button again. ATMOSPHERIC PRESSURE The atmospheric pressure indicator, in the weather forecast window, uses arrows to indicate if the atmospheric pressure is increasing, remaining stable, or decreasing. Arrow indicator Temperature Trend Rising Steady Falling MAXIMUM AND MINIMUM TEMPERATURES The maximum and minimum recorded temperatures will be automatically stored in memory. [. . . ]