User manual IROX METE-ON 3

[. . . ] The Mete-On 3 is a highly developed product based on the radio clock technology with the additional function of the Meteotime weather data reception depicting the weather forecasts for the current day. With the wake-up signal, you can see the forecasts in the morning for both the day and the evening by means of one of the 15 weather symbols. Furthermore, you can also see the expected temperatures and the precipitation probability for the whole day in %. These weather forecasts are broadcast via the time signal transmitters HBG in Switzerland and DCF77 in Germany. [. . . ] In the example above, 14:-- thus becomes a 13:-Note: If a time zone is entered that deviates by more than -+3 hours from the time received, the synchronisation and the weather forecast reception will be deactivated. Language setting The language selection of the display of the day in 3 letters is: D: German (basic setting) GB: English F: French NL: Dutch I: Italian E: Spanish The language can be changed with the keys /. Snooze time The alarm clock has a SNOOZE function (slumber function or wake-up call repeat after x minutes if the SNOOZE key is pressed during the acoustic wake-up signal. This SNOOZE time x can be set in this menu: 4, 8 or 12 minutes. The snooze time can be changed with the keys /. Key for at least 3 seconds until the normal display ap- The Mete-On 3 can display weather information of up to 60 regions in Europe. You will find a pre-programmed selection of towns and cities in these regions in the device. the weather region Berne/Switzerland is pre-set on delivery. Another location can be set as follows: Press and hold (3 seconds) the key The following settings can be made to the respective flashing segment. Country Sixteen countries are available (the pre-programmed list of towns and cities in the Mete-On 3 is attached at the end of these instructions). The abbreviation for vehicles is used for each country (e. ) The country can be selected with the keys /. City A different number of places is available per country. please select the location nearest to your place of residence. If you are unsure, there is a tool on the Internet page www. Com where the region valid for your place is residence is indicated. Each location is displayed with a 4-letter abbreviation (see list at the end of these instructions). The appropriate location in the selected country can be selected with the keys /. Exit SET function: Press the key The normal display then appears. If weather forecasts are available, these now appear in the display. The required location can be changed at any time. 3 seconds (until a short acoustic signal sounds out). [. . . ] It may be sufficient to turn the device 30-90°. there is interference to the reception at the place of installation of the Mete-On 3. Use the , TEST` function from the instructions for use to find a more favourable place of installation. The Meteotime symbol in the status area is not fully displayed · There are gaps in the weather forecasts or they are not available There was interference to the radio reception of Mete-On 3in the night and less than 75% ofthe data received are correct. [. . . ]