User manual IROX PRO-X USB

[. . . ] USER MANUAL PRO-X USB 1 Table of Contents Introduction Features Contents of Complete Weather Station Kit Installing your weather station Setting up the Remote Weather Sensors Setting up the UV Sensor Setting up the Thermo-Hygro Sensor(s) Setting up the Rain Sensor Setting up the Anemometer (wind sensor) Setting up the Main Console Unit Starting up the Main Console Unit Using your Weather Station Buttons and Controls Navigating between Different Modes Customizing your Weather Station LED Backlight Options Linking the Weather Station to a Computer Using the Different Weather Modes Pressure and Weather Forecast Mode UV Mode Clock and Alarm Mode Sunrise/Sunset Mode Temperature and Humidity Mode Rain Mode Wind Mode Maintenance Troubleshooting Appendix City Codes Specifications 3 4 6 9 9 9 10 11 12 13 14 14 14 17 20 21 21 22 22 27 28 34 36 38 40 44 46 53 53 58 This Operation Manual is part of this product and should be kept in a safe place for future reference. It contains important notes on setup and operation. 2 Introduction Congratulations on your purchase of the PRO-X USB Weather Station. The weather station consists of a main console unit with a remote control, as well as an assortment of remote sensors which collect and transmit a wide range of weather data, including outdoor temperature, humidity, wind speed and direction, rain amount and rain rate. Main Console Unit The main console unit features a radio-controlled atomic precision clock with alarm and weather forecast. [. . . ] In Clock and Alarm Mode, press and hold SET to enter clock and calendar setup. The day of week should start flashing in the display. Set Language: Press UP or DOWN to select language for day of week: English, German, French, Italian, Spanish or Dutch Press SET to confirm your selection. Select City Code: Press UP or DOWN to select city code for your local area. Refer to P. XX for a list of available codes. (if USR was chosen for city code) Set Minute for Latitude: You will be asked to enter your latitude in minutes (º). Press and hold either button for fast advance. Repeat above procedure to set seconds for latitude, minutes for longitude and seconds for longitude. (if USR was chosen for city code) Set Time Zone: Press UP or DOWN to adjust value in resolution of 30 min. Press and hold either button for fast advance. (if USR was chosen for city code or city is in a DST zone) Set Daylight Saving Time Option: Press UP or DOWN to turn DST option on or off. Press and hold either button for fast advance. Repeat the above instructions to set year, month, day, calendar display format (day/month or month/day), time display format (12 hr/ 24 hr), local hour and local minutes. Upon completion the display will return to normal Clock and Alarm Mode. Note: Press and hold SET anytime during the setup to return to normal Clock and Alarm Mode. Rotating between Different Clock/Calendar Displays In Clock and Alarm Mode, each press of SET rotates clock display between: -Hour: Minute: Weekday -Hour: Minute for UTC (Coordinated Universal Time) -Hour: Minute: City -Hour: Minute: Second -Month: Day: Year (or Day: Month Year depending on settings) Activating/Deactivating the Time Alarms 1. In Clock and Alarm Mode, each press of ALARM rotates clock display between: -Weekday Alarm Time (displays OFF if weekday alarm deactivated) - Single Alarm Time (displays OFF if single alarm deactivated) - Pre-Alarm Time (if any of above alarm is activated, this function is ON) 2. When the above alarms are displayed, pressing UP or DOWN will activate/deactivate the corresponding alarm. Note: Press SET anytime during alarm selection mode to return to normal clock display. 19 Setting up the Time Alarms 1. In Clock and Alarm Mode, press ALARM to select alarm which you wish to configure. Press and hold ALARM until hour starts flashing in the display 3. Set Alarm Hour: Press UP or DOWN to adjust value. [. . . ] The weather readings do not correlate with measurements from TV, radio or official weather reports. Weather data can vary considerably due to different environmental conditions and placement of weather sensors. Check the placement tips included in this manual to site your sensors in the best possible way. The weather forecast is a prediction of weather after 12-24 hours, and may not reflect current weather conditions. PRECAUTIONS This product is engineered to give you years of satisfactory service if you handle it carefully. [. . . ]