User manual IROX RED WAVE

[. . . ] 6 seconds during which the display lighting is active, you can scroll through in display mode with each touch as described above. 3. Switch `Return to time' on the underside ON: If no manipulation to the device is made after selection of a display mode with the rocker-switch contact, the display automatically changes back to the time display. OFF: The display always stays in the last mode displayed. Keys on the underside M ­ same function as the display rocker-switch contact S ­ pressed briefly: To change the display in the corresponding display mode or to activate a function ­ pressed for a long time (approx. [. . . ] not in the setting mode, one of the 8 melodies can thus be selected. > Details about the keys can be found in the corresponding function description 4- TIME SETTING (in the display mode TIME) 1. Press the `S' key briefly on the underside of the device in order to select the 12/24-hour display format. - The flashing hours number can be set with the upwards `' or downwards `' key. The flashing minutes number can be set with the upwards `' or downwards `' key. - Press the `S' key again to confirm the time set. You can activate the rundown by holding the `' or `' key. 5- DATE SETTING (in the display mode DATE) Press and hold the `S' key for approx. - The flashing years number can be set with the upwards `' or downwards `' key. The flashing month can be set with the upwards `' or downwards `' key. The flashing day can be set with the upwards `' or downwards `' key. - The weekday is set automatically via the calendar - Press the `S' key again to confirm the date set and to exit the setting mode. 6- WAKE-UP TIME SETTING (in the display mode AL) Press and hold the `S' key for approx. The `TIMER' symbol then stops flashing. In order to allow the timer to continue running, press the `S' key again. When the timer is stopped, you can also move back to the time set with the upwards key `' or with the downwards key to zero. When the time has expired, the alarm sound `beep' sounds out for 60 seconds and the display flashes in different colours. A melody cannot be selected in this function. The alarm sound can be interrupted at any time using the rocker-switch contact of the display. If this is not done, the alarm sound can be interrupted when the 60 seconds have expired and the prior timer time appears, ready for a restart, on the display. 8- DISPLAY MODE OF THE TEMPERATURE (in the display mode TEMPERATURE) Press the `S' key to change the temperature unit from °C to °F and vice versa. 9- MELODY SELECTION (in each display mode apart from TIMER) In the time mode, press the upwards `' or downwards `' key to select one of the 8 melodies. The last played melody is then adopted for the wake-up sound. If you do not wish this, go into the AL mode and select the '9th melody' as described here: the simple `BEEP' tone. 10- CARE INSTRUCTIONS - Do not expose the device to extreme temperatures or direct sunlight over longer periods. - Avoid blows and shocks of any kind to the device. [. . . ] - Avoid blows and shocks of any kind to the device. - For cleaning use a dry soft cloth that you have moistened with water and a mild cleaning agent. Never use volatile substances such as benzene, thinner, cleansing agents in spray cans etc. - When your clock is not being used store it in a dry area and out of the reach of small children. [. . . ]