User manual IT WORKS M4029Q

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

Sponsored Links

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual IT WORKS M4029Q. We hope that this IT WORKS M4029Q user guide will be useful to you.

Lastmanuals help download the user guide IT WORKS M4029Q.


IT WORKS M4029Q : Download the complete user guide (3604 Ko)

Manual abstract: user guide IT WORKS M4029Q

Detailed instructions for use are in the User's Guide.

[. . . ] All other brand and product names mentioned in this document are registered trademarks or trademarks of their respective holders. The Software supplied with these Products is provided under license from Seyeon Tech Co. GNU General Public License Information This product includes certain open source or other software originated from third parties that is subject to the GNU General Public License (GPL), GNU Library/Lesser General Public License (LGPL), and different and/or additional copyright licenses, disclaimers, and notices. The exact terms of GPL, LGPL, and some other licenses are provided to you with this product. [. . . ] If an abnormal termination is happened during the formatting process, it is possible for the hard drive to be defected. , Ltd FlexWATCH® Web Admin User Manual 4) When done, click OK to finish formatting 5) Check the current status “Formatted” as shown below 6) Click Reboot Note: If the current status is not displaying “Formatted”, it is possible for the Micro SD card to be defected. 2 Disk Information Detailed information of the installed Micro SD card can be found in Disk Information page as shown below. 3 Disk Circulation The installed Micro SD card can be set whether or not to overwrite. ς§ Circulation: Overwrites old recorded data when the installed Micro SD card is full.  Restriction Duration: Record data only in the configured period and delete after the period.  Pause at full: Stops recording when the storage is full, and display STOP in the status as shown below. 4 Disk Status Report Current status of the installed Micro SD card can be reported by email periodically or in the set conditions. To setup the storage statures Report, please follow the steps below: 1) Set Report conditions as explained below    Disk Full Notification: when the Micro SD card is full, notify by email. Periodic Notification: at a specified time, notify the Micro SD card status by email. , Ltd FlexWATCH® Web Admin User Manual 2) Enter your SMTP server address 3) If your SMTP server requires user authentication, select Enable for Authentication Login and enter the user ID and Password for your SMTP server 4) Enter your email address in Sender field, which will show the message was sent from the FlexWATCH® device as a notification 5) Enter the email addresses of recipients up to 3 addresses 6) In the User-Defined Message box, you may enter any messages that will include with notification email 7) Click Apply 6. 2 Recording Setting Depending on number of video channels or streams supported, the Recording Setting page will be displayed as follows: Note: The procedure of recording setting is same for all streams or channels. , Ltd FlexWATCH® Web Admin User Manual To configure the recording, please follow the steps below: 1) Click on the Camera Name of the desired channel to record 2) Click the first Not Used Condition Note: Up to 4 conditions can be set. If multiple conditions are set, recording starts when any one or more conditions meet. (Logical OR) 3) When the condition page appears, Enable the selected Condition M4029-14 36 Seyeon Tech Co. , Ltd FlexWATCH® Web Admin User Manual 4) Select Mode     Always: [Please do not use this mode for Email notification. ] Event Only: Send email when selected event occurred Schedule and Event: Send email when selected event occurs in specified time 5) Specify the Recording Schedule if necessary 6) Select Event Type  Event will be triggered by the followings:  , Ltd FlexWATCH® Web Admin User Manual 8) When the following page appears, check the summary in the purple box as shown below. 9) Enable for the Recording Service 10) Set Pre/Post Alarm Images, if necessary Note: MJPEG Compression Type is required for Pre/Post Alarm Image features. 11) Click Save 12) When the following page appears, make sure the recording configuration is enabled as red box below 13) Go to step 1) if recording configuration is needed for other channels 14) Click Apply when the recording configuration is completed 15) Click Record if recording status is “Stop” as shown below M4029-14 38 Seyeon Tech Co. , Ltd FlexWATCH® Web Admin User Manual 16) Reboot the NVR as shown below 6. 3 Recording Profile Recording Profile shows current recording settings for all channels as shown below. 4 Clear Setting Recording configuration can be deleted or reset for the all channels in this menu. [. . . ] 2) Click the first Not Used Condition (Multiple condition can be combined and used) 3) When the condition page appears, Enable the selected Condition 4) Select Mode  Always: [Please do not use this mode for Email notification. , Ltd FlexWATCH® Web Admin User Manual    Schedule Only: [Please do not use this mode for Email notification. ] Event Only: Send email when selected event occurred Schedule and Event: Send email when selected event occurs in specified time 5) Specify the Recording Schedule if necessary 6) Select Event Type  Event will be triggered by the followings:  Connected Disconnected Boot Finished Serial Input 7) Click Save 8) When the following page appears, check the condition summary as marked in red below. , Ltd FlexWATCH® Web Admin User Manual 11) When the following page appears, Enable the FTP (Periodic) service. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE IT WORKS M4029Q

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual IT WORKS M4029Q will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag