User manual ITI SIMON

[. . . ] S I M O N O W N E R 'S M A N U A L 1 FCC Notices FCC Part 15 Information to the User Changes or modifications not expressly approved by Interactive Technologies, Inc. can void the user's authority to operate the equipment. FCC Part 15 Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] STAR Press to open or close your garage door, if programmed, or your system may be programmed to turn on a light using this button. For any keypress on the KeyChain Touchpad, hold the button until the indicator light blinks. 10 Programming Your System What You Can Change: Options: Press Add in the START MENU and follow the voice prompts to turn an option on. Press Delete in the START MENU to turn an option off. Option 01 - Panel Beeps Panel Beeps are any beeps (including chime beeps) that come from the Control Panel. Panel Beeps, except for alarm sirens, may be disabled. Option 02 - Panel Voice Panel Voice may be disabled, except for status messages, open sensor responses, and when in program mode. Option 03 - Latchkey Time Adding this option allows you to program Latchkey Time. Latchkey is used to notify parents if children do not arrive home at a predetermined time and disarm the system. Option 36 - Sensor Activated Light Lockout Start Time Option 37 - Sensor Activated Light Lockout Stop Time (Not for use with Basic Model) The Control Panel will not turn on a light which is activated by a sensor, even if sensor activated lights are enabled, between the programmed start time (option 36) and the programmed stop time (option 37). Both options must be programmed for this feature to work. The LIGHTS Sensor Activated button must be lit for lights to turn on. Option 41 - Voice Chime The Control Panel will verbally announce which chime sensor has been tripped if the chime feature is on. Option 42 - Speaker Level (Not for use with Basic Model) Turn the Control Panel speaker level to the high voice level when the option is turned on or turn the speaker level to the low voice level when turned off. Option 43 - Pager Phone Number Up to 22 digits, including pauses, may be programmed for the pager phone number. Add 3 or 4 pauses to the end of the phone number to ensure the complete pager message will be received. Press the Test button to program a pause into the phone number. The Control Panel will call the pager to indicate: · No activity - The no activity time period is programmed by your installer. A no activity alarm is called in if the programmed amount of time passes, the Control Panel is subdisarmed, disarmed, or doors and windows armed, and no activity has occurred (a key has not been pressed or a sensor has not been tripped). Tripping of non-intrusion chime sensors is not considered activity. Latchkey - A latchkey report is called when the system · · is not disarmed by a predetermined time. The latchkey time is programmed by the user - Option 03. Phone Test - A phone test report is called in when a phone test has been performed. [. . . ] Notify the fire department from a neighbor's phone. Emphasize that no one should enter the premises if they hear sirens in the house. If you arrive at the premises and hear sirens, do not enter. Call for emergency assistance from a neighbor's phone. Emergency Planning Since an emergency is always unexpected, you should develop plans to help prepare for a variety of emergency situations. [. . . ]