User manual ITS TELECOM PANTEL VOIP INSTALLATION AND PROGRAMMING V2 RELEASE 11

[. . . ] Pancode VoIP Pantel VoIP Access Control Door Phones Installation and Programming Manual Version 2 Release 11 ed2 September 2010 Pancode VoIP/Pantel VoIP Access Control Door Phones Installation and Programming Manual NOTICE This publication refers to the PANCODE IP and Pantel IP Door Access Control devices, Firmware Version 2. xx. Additional copies of this manual may be obtained from ITS Ltd. Reproduction of this manual or parts thereof without written permission from ITS is strictly prohibited. reserves the right to modify the hardware and software described herein without prior notice. [. . . ] It appears on the label attached to the rear panel of the device. Use Lower Case only for letters which presents in the MAC address To find the unit in the network: a. Insert the installation CD and copy the query. exe file from the Software directory to the local hard drive. b. Start MS Windows DOS prompt application. Access the directory, in which the query. exe application exists. d. Enter the following command: query XX:XX:XX:XX:XX + <Enter>, where XX:XX:XX:XX:XX is the MAC address. A search for the device takes place, at the end of which the unit IP address appears (Figure 5-4). Figure 5-4. Searching for Device Using Query 31 Pancode VoIP/Pantel VoIP Access Control Door Phones Installation and Programming Manual 5. 2 Scanning for a Device in the Network When the unit MAC address is unknown, it is possible to find an existing device in the network using the SCAN utility from the installation CD. SCAN utility required for any OS Windows based network capturing utility installation. For example: The Wireshark utility which can be downloaded from the link http://www. wireshark. org/download. html To find a device in the network: a. Insert the installation CD and copy the scan. exe file from the Software directory to the local hard drive. b. Disconnect the Pancode VoIP/Pantel VoIP from the external power supply. Start MS Windows DOS prompt application. d. Access the directory, in which the scan. exe application exists. Enter the following command: scan + <Enter>. A scan takes place, at the end of which the installed PC Ethernet adaptor appears (Figure 5-). Figure 5-3. Select the required Ethernet adaptor. g. A scan for the device takes place, at the end of which the detected Pancode/Pantel device IP information, including MAC address and network settings, appears (Figure 5-). Figure 5-4. Search Results for Device in the Network 32 Pancode VoIP/Pantel VoIP Access Control Door Phones Installation and Programming Manual 5. 3 Application Interface When running the application, the login screen appears: Figure 5-5 Web GUI login screen Type `Login' as User name and `Password' in order to enter to programming screens. 1. The default `Login' value is `admin' and default `Password' value is `admin' 2. Very recommended to change default login parameters in order to increase device's security level. After then login information accepted the main screen opens, comprising the navigation menu, parameters fields and functional buttons (Figure 5-6). 33 Pancode VoIP/Pantel VoIP Access Control Door Phones Installation and Programming Manual Figure 5-6. Application Interface The navigation menu contains the following items: System Authorization parameters Local network parameters Proxy server parameters Codec Type Volume settings Time mode DHCP support Dialing mode Door opening time Auto Answer mode Video Camera operational mode (optional*) * Video camera operational mode depends on the Door Unit's hardware configuration. 34 Pancode VoIP/Pantel VoIP Access Control Door Phones Installation and Programming Manual VoIP Dialing Settings Speed dialing mode Door Access Codes Speed dialing mode destination numbers Regular (Normal) Direct dialing mode First digits of Extensions Regular (Normal) dialing mode Door Access Codes Call Button definitions Door opening from extension code No answer timeout The Main Parameters screen contains the following operational buttons: Submit Reset to default Reboot Upload Config File Save Config File Upload modified settings to the Door Unit Reset Door Unit to the factory default settings Restarts the Door Unit Upload previously saved Door Units configuration file. ( Note: Saved file renamed to Config. CFG) Save existing Door Panel configuration as file on local PC drive (the existing configuration file will be saved with extension Config. SAV. [. . . ] Specify a maximum time interval in seconds, when the IP Door Panel can be in the No Answer mode during incoming call before rejecting the call. During this time device indicates about incoming call by short beeps Legal entry: 0 ­ 99 seconds Inter Digit Time The maximum allowed keypad dialing inter digit time out interval. Expired time interval time shows to door unit that the destination number or entry code dialing process is finished. Parameter can be set in msec, default value is 3000 msec = 3 seconds No answer Time Out 40 Pancode VoIP/Pantel VoIP Access Control Door Phones Installation and Programming Manual Parameter DNS IP address * Description * - Parameter means for the technical purposes only. [. . . ]