User manual JABRA EASYCALL

[. . . ] Please note: The lifetime of the battery will be significantly reduced if your device is left uncharged for a long period. We therefore recommend that you recharge your device at least once a month. Jabra EASYCALL 4 english TURNING YOUR HEADSET ON AND OFF -  Slide the on/off button towards the symbol “O” to turn the headset off. PAIRING IT WITH YOUR PHONE Headsets are connected to phones using a procedure called ‘pairing’. [. . . ] Adjust sound and volume* - Tap the volume up or down to adjust the volume. Mute/un-mute - To mute, press both volume up and down at the same time. A low beep alert plays during a muted call. - To un-mute, tap either of the volume buttons. * Phone dependent Jabra EASYCALL 7 english Call waiting and placing a call on hold* - Press the answer/end button once to put the active call on hold and answer the waiting call. - Press the answer/end button to switch between the two calls. - Tap the answer/end button to end the active conversation. jabra EASYCALL 6 english Jabra EASYCALL added. Get an instant status from the Jabra StatusDisplay™ by a tap on any button on the headset when you are not on a call. HOW THE VOICE GUIDANCE WORKS When your headset has established a connection to your phone (or other Bluetooth® device) the voice guidance will say “connected”. When your headset has less than 30 minutes talk time remaining the voice guidance will say “low battery”. USING JABRA EASYCALL WITH TWO MOBILE PHONES Jabra EASYCALL is capable of having two mobile phones (or Bluetooth® devices) connected to the headset at the same time. This will give you the freedom of having only one headset to operate both your mobile phones. * Phone dependent Jabra EASYCALL 8 english - This lets you put a call on hold during a conversation and answer a waiting call. Once you have “paired” your headset with two phones simply make sure your headset is on, and that Bluetooth® is enabled on the phones and the headset will then automatically connect to both phones. Please note that Last Number Redial will dial the number from the last outgoing call, independent of the mobile phone, and the Voice Dialling function will only work on the last paired mobile phone. TROUBLESHOOTING & FAQ I hear crackling noises - Bluetooth® is a radio technology, which means it is sensitive to objects between the headset and the connected device. I cannot hear anything in my headset - Increase the volume in the headset. - Ensure that the headset is paired to a device that is playing. - Make sure your phone is connected to the headset by tapping the Answer/End button. I am having pairing problems - You may have deleted your headset pairing connection in your mobile phone. I want to reset the headset It is possible to reset the headset. [. . . ] Parola sau codul PIN este un cod pe care îl introduceţi în dispozitivul dumneavoastră care are funcţia Bluetooth® activată (de exemplu, telefonul mobil) pentru a-l putea cupla cu dispozitivul dumneavoastră Jabra EASYCALL. The handsfree is now ready for use TOIMINTAOHJEET - Vastaa puheluun napsauttamalla kuulokkeen vastaus-/ lopetuspainiketta. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by GN Netcom A/S is under license. [. . . ]