User manual JANE CROSS REVERSE

[. . . ] WARNING: Always use the crotch strap in combination with the waist belt. WARNING: Check that the pram body or seat unit attachment devices are correctly engaged before use. WARNING: This seat is not suitable for running or skating. The maximum amount carried in the basket must never exceed the weight indicated on the basket (4 kg). [. . . ] A It is advisable to completely fit one side of the hammock before starting to fit the other, this makes it easier. - HOW TO FIT THE HAMMOCK FACING FORWARDS Fit the opening in the hammock into the A1 front fastener. A With the hammock supported in A1 lower the rear part until it fits into A2. When one side is fitted repeat the operation with the other side. A With the hammock supported in A2 lower the rear part until it fits into A1. C When one side is fitted repeat the operation with the other side. - SWIVEL WHEELS Your CROSS REVERSE has front swivel wheels that can be steered or the steering can be locked. To lock it press the button and once the wheels are aligned with the longitudinal axle of the pushchair they will automatically lock. Use it as a parking brake whenever you can, it is an important safety element. B To adjust the brake: If you need a more precise adjustment follow the indications in figure. It may be necessary to push the pushchair slightly for the brake to be fully activated. - SEAT BELT Your CROSS REVERSE has a safety harness so that your child is always safe. - ADJUSTING THE FOOTREST The position of the footrest can also be adjusted to suit the child's position. Press button A situated on the footboard on both sides of the pushchair while you move the footrest downwards. 12 To move it upwards you don't need to press the button as it has a free movement mechanism. - SAFETY LIGHTS It is possible to activate the safety lights on your CROSS REVERSE so you can be seen in poor visibility conditions. press the button to activate this device. 10 There are 3 types of light sequences programmed to be activated each time you press the button. (Flashing ­ Permanent light - Sequential. ) The fourth time you press the button the lights will turn off. [. . . ] To take the rear wheels off hold the button on the axle down and pull the wheel. Fit the rear wheels onto the chassis, pressing the central button on the wheel. To fit it correctly insert the end until it completely covers the hole of the adjuster. When the hood has been fitted the position can be adjusted by using the part on the side of the pushchair, to fold the hood, unfold it and put on or take off the parasol. [. . . ]