User manual JBL BASS550

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual JBL BASS550. We hope that this JBL BASS550 user guide will be useful to you.

Lastmanuals help download the user guide JBL BASS550.


Mode d'emploi JBL BASS550
Download
Manual abstract: user guide JBL BASS550

Detailed instructions for use are in the User's Guide.

[. . . ] Remove the nut (9) and the split washer (8) if necessary. Fully insert the threaded portion (1) of the `thick' end of the ball/shaft (2) into the center opening (6) of the housing bracket (7), with the housing bracket middle `convex' area towards the threaded portion (1). [. . . ] Place the housing bracket (7) against the housing (10) of the speaker. The housing bracket (7) features an arrow and the word `UP' indicating the correct installation direction of the bracket. Using a suitable screw driver securely tighten all three bolts (11) to the back of the housing. If the bracket (7) is installed correctly, it will be sitting flush against the back of the housing. The back-up cord (13) is provided as an additional measure to prevent the fall of the speaker in the event the speaker becomes detached from the wall bracket. The remaining bracket-to-housing bolt (12) (bolts 11 and 12 are identical) will need to go through the eyelet (14) (eyelets 14 and 15 are also the same) at the end of the cord before going through the housing (10). Mount the wall bracket (16) onto the wall, using three of the four #12 screws (20) (not supplied), while following the recommendations in item (f) above. Two of the three screws should be used in the top two holes of the mounting bracket. The third screw is used in one of the wall bracket's (16) lower screw holes. Install the fourth #12 screw (20) making sure that it goes through the eyelet (15) at the end of the back-up cord (13) before it goes through the wall bracket's other lower screw hole. Using a suitable screwdriver, securely tighten all 4 screws. Using a suitable wrench, loosen the small nut (4) and the large nut (5) on the ball shaft (2) to allow the orientation of the speaker. [. . . ] Once the correct orientation is obtained fully tighten the large nut (5) with a suitable wrench until the ball/shaft (2) is locked into position and does not move. Tighten the small nut (4) with another wrench while keeping the large nut (5) tight using the first wrench. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE JBL BASS550

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual JBL BASS550 will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag