User manual JBL ESC350

[. . . ] ® ESC350 simple setup guide Table of Contents Important Safety Precautions . 6 Connect Optional Cassette Deck to The Source . 11 To Play the Tracks of a CD in Random Order . 12 If a Selected FM Station is a Little Noisy . [. . . ] The power-supply cord or the plug has been damaged; or b. Objects have fallen onto, or liquid has been spilled into, the product; or c. The product has been exposed to rain or water; or d. The product does not operate normally when following the operating instructions. Adjust only those controls that are covered by the operating instructions, as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation; or e. The product has been dropped or damaged in any way; or f. The product exhibits a distinct change in performance; this indicates a need for service. When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards. Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. The product should be mounted to a wall or ceiling only as recommended by the manufacturer. The product should be situated away from heat sources such as radiators, heat registers, stoves or other products (including amplifiers) that produce heat. Figure 1. Example of Antenna Grounding as per National Electrical Code, ANSI/NFPA 70 Antenna Lead-In Wire Ground Clamp Antenna Discharge Unit (NEC Section 810-20) Grounding Conductors (NEC Section 810-21) Electric Service Equipment Ground Clamps Power Service Grounding Electrode System (NEC Art 250, Part H) Part No. Operations The Source Power Volume Volume Mute Volume Remote Control Power Sleep ­ THE SOURCE REMOTE Volume + Mute Volume CD Open ­ + To raise volume: Turn control on The Source clockwise or push "+" on the remote control. AM/FM CD Random Skip AM/FM Repeat Search Tune TV Auto Tune TV Volume Mute Aux Surround Tape/Aux Stereo/Mono ­ Tone Calibrate + Rear Speakers TM Volume ­ Bass + ­ Treble + Tuner Presets Auto Add Surround Mode ­ THE SOURCE REMOTE + Delete To lower volume: Turn volume control on The Source counterclockwise or push "­" on the remote control. Mute Mute Volume ­ REMOTE + To lower volume completely: Push "Mute" on the remote control. When "Mute" is pushed again, the volume will return to its original level. ­8­ Bass Treble ­ Bass + Surround ­ Treble + ­ Treble + Surround Surround Mode ­ Calibrate + Calibrate THE SOURCE REMOTE ­ + THE SOURCE REMOTE To raise the bass level: Push "+" on The Source or push "Calibrate" on the remote control until "Bass" illuminates in The Source display. Push "+" until you reach the desired level. To raise the treble level: Push "+" on The Source or push "Calibrate" on the remote control until "Treble" illuminates in The Source display. Push "+" until you reach the desired level. ­ Bass + Surround ­ Treble + ­ Treble + Surround Surround Mode ­ Calibrate + Calibrate THE SOURCE REMOTE ­ + THE SOURCE REMOTE To lower the bass level: Push "­" on The Source or push "Calibrate" on the remote control until "Bass" illuminates in The Source display. Push "­" until you reach the desired level. To lower the treble level: Push "­" on The Source or push "Calibrate" on the remote control until "Treble" illuminates in The Source display. Push "­" until you reach the desired level. ­9­ CD Operation The Source To Play a CD Search Tune TV Power Aux Power Open Volume Surround Remote Control Power Sleep THE SOURCE THE SOURCE REMOTE Mute Volume 1. Push "Power" and/or "Open" on The Source. Push "Play" on The Source or the remote control. (The door will close automatically. ) Volume CD Open ­ + AM/FM CD Random Skip AM/FM Repeat Search Tune TV Auto Tune To Skip to a Different Track AM/FM TV Aux Surround Tape/Aux Stereo/Mono Skip + Rear Speakers TM ­ Tone Calibrate TV ­ Bass + ­ Treble + Tuner Presets Auto Add Search Tune Aux Surround Mode Delete THE SOURCE REMOTE Push "|<" or ">|" on The Source or the remote control until the number of the desired track appears on the display. To Scan within the Same Track Skip AM/FM Search Tune TV Aux THE SOURCE REMOTE Push "<<" or ">>" on The Source or the remote control. ­ 10 ­ To Pause the CD Search Tune To Play the Tracks of a CD in Random Order TV CD Random Aux AM/FM Repeat Push "Random" on The Source. [. . . ] When listening to an actual recording, the volume level of the surround channels is generally much lower than that of the front channels. In fact, when listening to a movie, virtually all of the dialogue and a substantial number of the effects are reproduced through the center channel. Surround Surround Surround ­ Calibrate REMOTE + Calibrate REMOTE ­ + Calibrate REMOTE ­ + Push "Calibrate" on the remote control until "Rear" appears in the display and the corresponding LED on top of the display is lit. ­ 16 ­ Push "+" on the remote control to increase the volume of the rear channels. Push "­" on the remote control to decrease the volume of the rear channels. Delay Time The Source The delay control allows the user to set the surround delay between 15 and 30 milliseconds in one-millisecond increments. The best setting will depend on the distance between the main listening area and the front speakers as well as the distance between the main listening area and the rear speakers. The chart at the bottom shows the recommended settings. Power 40 Distance (in feet) from Rear Speakers 35 30 25 20 15 10 5 0 0 5 10 15 20 25 30 35 40 Distance (in feet) From Front Speakers Preferable Acceptable 15 ms 15 ms 15 ms 20 Remote Control Power Sleep Mute Volume Volume CD Open ­ + AM/FM CD Random Skip AM/FM Repeat Search Tune TV Auto Tune ms 25 TV ms 30 Aux ms 30 Surround Tape/Aux Stereo/Mono ms 30 ­ Tone Calibrate + Rear Speakers TM ms ­ Bass + ­ Treble + Tuner Presets Auto Add Surround Mode Delete Surround Surround Surround ­ Calibrate REMOTE + Calibrate REMOTE ­ + Calibrate REMOTE ­ + Push "Calibrate" on the remote control until "Delay" appears in the display and the corresponding LED on top of the display is lit. Push "+" on the remote control to increase the delay time. Push "­" on the remote control to decrease the delay time. ­ 17 ­ Troubleshooting If there is no sound from any of the speakers, check the following: · Make sure the subwoofer is plugged into an active AC wall outlet. [. . . ]