User manual JBL FSN26

[. . . ] FSN24, 26 OM 12/8/99 2:01 PM Page 1 OWNER'S GUIDE PRODUCT LINE: NORTHRIDGE SERIES FSN24 MODEL NUMBERS: For use with N24 loudspeakers FSN26 For use with N26 loudspeakers PRO SOUND COMES HOMETM THANK YOU FOR CHOOSING JBL For more than 50 years, JBL has been involved in every aspect of music and film recording and reproduction, from live performances to the recordings you play in your home, car or office. [. . . ] Orient the post so that the openings near the top and bottom of the post face toward the rear of the base, making sure that the alignment fin on the shaft fits into its corresponding recess in the back of the hole on the base. Slip the bolt up through the hole in the bottom of the base and into the threaded hole in the bottom of the post. Check the alignment of the post and base; tighten firmly using a 3/4-inch socket wrench. FSN24, 26 OM 12/8/99 2:01 PM Page 2 WIRE HOOKUP "Fish" the speaker wire through the stand posts and bring it out through the round hole on the coneshaped fitting. AT TA C H S P E A K E R 1. While looking at the top of the stand, turn the "knurled" nut (a) that is installed on top of the threaded shaft (b), by hand clockwise, until it is seated against the top of the stand post (c). Place the speaker on top of the stand, with its standattachment hole on the bottom aligned with the stand's threaded shaft (b). Be careful when starting the threads to avoid crossthreading (misaligning the threads ­ see Step 3); cross-threading may damage the speaker and/or the stand. [. . . ] JBL is a registered trademark of JBL, Incorporated. [. . . ]