User manual JBL GT150D

[. . . ] Warning: Playing loud music in an automobile can permanently damage your hearing as well as hinder your ability to hear traffic. We recommend listening at low levels while driving. [. . . ] If you wish to use a vented enclosure, we strongly recommend having your authorized JBL dealer build it or verify that your design is correct if you wish to build it yourself. An optimum vented enclosure is always larger than the optimum sealed box for the same woofer and will require more space inside the vehicle. Bandpass enclosures often provide the most output available from any amplifier and subwoofer combination at the expense of sonic accuracy. If sheer SPL (sound-pressure level) is what you desire most, choose a bandpass enclosure. Bandpass-enclosure design is very tricky and the aid of a computer and enclosure design software is necessary. If you are an experienced installer or have some woodworking experience, you may wish to build the enclosure described in the enclosure design sheet included with this woofer. Fortunately, there are many prefabricated bandpass boxes available and they are all optimized to extract the most output possible from any woofer. Bandpass enclosures can be quite large and may require a lot of space inside your vehicle. 02 Connecting Your Subwoofer to Your Amplifier JBL GT Series JBL GT Series subwoofers are available in two different configurations: as a single 4-ohm voice coil or as dual 4-ohm voice coils. Depending on the amplifiers you are using, you may use either single-voice coil or dual-voice coil subwoofers in singles or multiples to maximize the power available from your amplifiers. To achieve the maximum amplifier output possible, you should design a speaker system that provides the lowest impedance that your amplifier is rated to drive safely. When designing a subwoofer system, consider the following rules: 1. Don't mix different subwoofer or enclosure types in the same system (use all single-coil woofers or all dual-coil woofers). [. . . ] Parallel connection RED STRIPE POS ( + ) BLACK STRIPE NEG ( ­ ) POS ( + ) NEG ( ­ ) Figure 2. Series connection RED STRIPE POS ( + ) BLACK STRIPE NEG ( ­ ) POS ( + ) NEG ( ­ ) 03 Specifications JBL GT Series GT100 10" Automotive subwoofer Power handling (RMS) Power handling (Peak) Sensitivity (2. 83V/1m) Frequency response Impedance Mounting depth Cut-out diameter 250 Watts 1000 Watts 90dB 28Hz ­ 500Hz 4 Ohms 5-3/4" (147mm) 9-1/8" (232mm) GT100D GT120 10" Dual-voice coil 12" Automotive automotive subwoofer subwoofer 250 Watts 1000 Watts 90dB 28Hz ­ 500Hz 250 Watts 1000 Watts 93dB 23Hz ­ 450Hz GT120D GT150 12" Dual-voice coil 15" Automotive automotive subwoofer subwoofer 250 Watts 1000 Watts 93dB 23Hz ­ 450Hz 250 Watts 1000 Watts 95dB 20Hz ­ 400Hz GT150D 15" Dual-voice coil automotive subwoofer 250 Watts 1000 Watts 95dB 20Hz ­ 400Hz Dual 4-ohm voice coils 6-3/4" (172mm) 14-1/4" (362mm) Dual 4-ohm voice coils 4 Ohms 5-3/4" (147mm) 9-1/8" (232mm) 6-1/4" (159mm) 11-1/8" (283mm) Dual 4-ohm voice coils 4 Ohms 6-1/4" (159mm) 11-1/8" (283mm) 6-3/4" (172mm) 14-1/4" (362mm) Declaration of Conformity JBL Consumer Products · 250 Crossways Park Drive, Woodbury, NY 11797 1. 800. 336. 4JBL (4525) · www. jbl. com Features, specifications and appearance are subject to change without notice. [. . . ]