Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual JBL GTO 2000. We hope that this JBL GTO 2000 user guide will be useful to you.
Lastmanuals help download the user guide JBL GTO 2000.
Detailed instructions for use are in the User's Guide.
[. . . ] If you feel you lack the tools or necessary experience, ask Always wear protective eyewear when using tools. Turn off all audio systems and other electrical devices before you start. [. . . ] system Setup and Adjustement Refer to figures 1-3 for location of adjustement switches and controls. Electronic Crossover The electronic crossover can be selected as a 12dB/oct high-pass filter (HPF), 12dB/oct low-pass filter (LPF) or it can be defeated (OFF). The crossover frequency can be set at any frequency between 30Hz and 320Hz. Input Sensitivity initially, turn the input-sensitivity LEVEL control to its maximum (counterclockwise) position. Turn on the source unit and increase the volume control until it is approximately t h r e e quarters of maximum-output level. Slowly increase the input LEVEL control (clockwise) while listening to the quality of the reproduced sound. When you hear distortion on the music peaks, turn the LEVEL control back slightly. It will only decrease the amount of volume control rotation before the amp is at full output power. It will also increase the amount of extraneous noise in your system. Choosing a Location and Mounting the Amplifier Amplifiers need air to stay cool. Suitable locations are under seats (provided the amplifier doesn't interfere with the seat-adjustement mechanism), in the trunk or in any location that provides enough air for the amp to cool i s l . Do not mount the amplifier with the heat-sink tef fins facing downward; this makes convection cooling of the amplifier impossible. [. . . ] If you are bridging the amplifier, connect the speaker wires to the terminals marked "bridged", observing proper polarity. HP (4 ohm) If you are running the amp in Tri-Mode (stereo and 75Hz 8. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE JBL GTO 2000
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual JBL GTO 2000 will begin.
