User manual JBL GTO755.6

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual JBL GTO755.6. We hope that this JBL GTO755.6 user guide will be useful to you.

Lastmanuals help download the user guide JBL GTO755.6.


Mode d'emploi JBL GTO755.6
Download
Manual abstract: user guide JBL GTO755.6

Detailed instructions for use are in the User's Guide.

[. . . ] Disconnect the (­) negative lead from your vehicle's battery. · Check clearances on both sides of a planned mounting surface before drilling any holes or installing any screws. Remember that the screws can extend behind the surface. · At the installation sites, locate and make a note of all fuel lines, hydraulic brake lines, vacuum lines and electrical wiring. [. . . ] There are two sets of terminals to make it easy to connect multiple woofers. Either set of (+/­) terminals may be used when connecting woofers. To the right are two application diagrams to help plan your subwoofer system installation. Figures 2 and 3 show how to configure the GTO subwoofer amplifiers (models GTO301. 1, GTO601. 1 and GTO1201. 1). NOTE: For simplicity, Figures 2 and 3 do not show power, remote and input connections. NOTE: Minimum speaker load is 2 ohms. GTO Amplifier (partial end panel) GTO Amplifier (partial end panel) + ­ ­ + + ­ Subwoofer Subwoofer Subwoofer Figure 2. GTO subwoofer amplifier with two woofer connections. Figure 3. GTO subwoofer amplifier with one woofer connection. APPLICATIONS ­ GTO75. 2 The JBL GTO75. 2 amplifier can be set up for stereo or bridged-mono operation, as shown in Figures 4 and 5. HP LP FLAT NOTE: For simplicity, Figures 4 and 5 do not show power, remote and input connections. NOTE: Minimum speaker impedance for stereo operation is 2 ohms. Minimum speaker impedance for bridged operation is 4 ohms. HP LP FLAT MODE FREQ MODE FREQ GTO75. 2 (partial end panel) GTO75. 2 (partial end panel) + ­ ­ + ­ + Figure 4. GTO75. 2 amplifier set up for stereo operation. Figure 5. GTO75. 2 amplifier set up for bridgedmono operation. 3 APPLICATIONS ­ GTO75. 4 The GTO75. 4 can be set up for stereo 4-channel, 3-channel or bridged 2-channel operation, as shown in Figures 6 through 8. NOTE: For simplicity, Figures 6 through 8 do not show power, remote and input connections. NOTE: Minimum speaker impedance for stereo operation is 2 ohms. Minimum speaker impedance for bridged operation is 4 ohms. Figure 6. GTO75. 4 amplifier in 4-channel (stereo) operation to drive front and rear full-range speakers. Figure 7. GTO75. 4 is set up for 3-channel operation to drive a set of full-range speakers and a subwoofer. Figure 8. GTO75. 4 used in bridged 2-channel mode to drive a set of components or subwoofers. 4 APPLICATIONS ­ GTO755. 6 The GTO755. 6 can be configured for 6-channel, 5-channel or 3-channel operation, as shown in Figures 9 through 11. NOTE: For simplicity, Figures 9 through 11 do not show power, remote and input connections. NOTE: Minimum speaker impedance for stereo operation is 2 ohms. Minimum speaker impedance for bridged operation is 4 ohms. ­ + ­ + ­ + Subwoofer ­ + Rear ­ + Front ­ + Subwoofer Rear Front Figure 9. 6-Channel operation: GTO755. 6 amplifier driving full-range front and rear speakers and a pair of subwoofers. Figure 10. [. . . ] Using a round end, press two clips onto each neon tube (e. g. , Street Glow AN9 or equivalent), as shown in Figure 13. For each tube, align both clips so the square ends slide onto an exposed extrusion edge, as shown in Figure 13. When installed correctly, each neon tube will sit under an extrusion and not be visible when viewed from directly above. Route each neon tube's power cable through its respective NEON hole on the end panel (see Figure 13). [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE JBL GTO755.6

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual JBL GTO755.6 will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag