User manual JBL JBL2500

[. . . ] JBL2SOO JBL26OO JBL2SOO JBLsSOO JBL4SOO jj Í ¡, I È I î íi JBL SERIES LOUDSPEAKERS INSTRUCTION MANUAL lntroduction l) High output levels. This means that modest amplifiers or receivers will be able to produce acoustical levels normally associated with amplifiers with substantially more iated power. 2) Smooth, extended response. [. . . ] Every room is different-and there a¡e. different tastes. hesitate to experiment on your own. Sodonrt . Connections To connect the loudspeaker systems to the receiver or amplifier, use two:' conductor insulated wire. Your JBL dealer'ca¡ recommend suitable cables; or you can buy wire at most hardware stores. We recommend #18 AWG (1 mm diameter) wire as a minimum size. If your speakers are more than 30 feet (10 m) from your receiver or amplifier, use larger diameter wire. Connections are made at the terminals located on the back of the loudspeaker. system, near the bottom edge. The terminals accept bare wire or banana plugs, either of which will The black terminal on the loudspeaker should be connected to the black or (-) loudspeaker connection terminal on the receiver or amplifier. . . Connecting the loudspeakers in this manner ensures that they will be in phase; that is, work together rather than in opposition. Connecting the loudspeakers out ofphase will not damage them, but will result in less bass and poor imaging. Most twoconductor wire is color coded, or has a ridge on one of its insulating jackets, so that you can easily identify which wire is connected to which terminal (Fig. 2). provide easy, secure connections. To prepare the wire, strip approximately U}-inch(l3 mm)of insulation. [. . . ] (5. 4 kgs. ) +Undistorted continuous power per channel. JBL Consurner Products lnc. JBL ín the USA 240 Crossways Park West Woodbury, N. Y. 11797 Printed in USA All contents 1988 JBL Consumer Products Inc. [. . . ]