User manual JBL MRX512M

[. . . ] If the provided plug does not fit your outlet, consult a electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit the apparatus. Only use attachments / accessories specified by the manufacturer. [. . . ] MRX500 speakers can generate considerable energy. When placed on a slippery surface such as polished wood or linoleum, the speaker may move due to its acoustical energy output. Precautions should be taken to assure that the speaker does not fall off a stage or table on which it is placed. 60 Hz - 20 kHz 90 Hz - 20 kHz 70º x 70º nominal Passive 1. 7 kHz 400 W / 800 W / 1600 W, 2 hrs1 350 W / 700 W / 1400 W, 100 hrs1 123 dB SPL continuous (129 dB SPL peak)2 97 dB SPL 1 x JBL 262H 305 mm (12 in) Differential Drive® woofer 1 x JBL 2408H 37. 5 mm (1. 5 in) annular polymer diaphragm, neodymium compression driver 8 ohms Symmetrical stage monitor, 15/18 mm, plywood. Dual-angle (0° or -10°), 35 mm pole socket Integrated handle / input cup Black DuraFlexTM finish Powder coated, black, 16 gauge perforated steel with acoustically transparent black screen backing. Neutrik® Speakon® NL-4 (x2), one on each end 645 mm x 380 mm x 345 mm (25. 25 in x 15. 0 in x 13. 5 in) 14. 9 kg (33 lb) SS2-BK: Tripod speaker stand SS3-BK: Satellite speaker pole IEC standard, full bandwidth pink noise with 6 dB crest factor for specified period Calculated based on power rating and sensitivity MRX515 - 15¨ two-way, bass-reflex Frequency Range (-10 dB): Frequency Response (±3 dB): Coverage Pattern: Crossover Mode: Crossover Frequency: Power Rating : (Continuous / Program / Peak) Maximum SPL²: System Sensitivity (1w @ 1m): LF Driver: HF Driver: Nominal Impedance: Enclosure: Suspension/Mounting: Transport: Finish: Grille: Input Connectors: Dimensions (H x W x D): Net Weight: Optional Accessories: 1 2 Stand mounting safety precautions Some MRX500 models include a 35 mm receptacle cup to allow mounting on tripod stands or on a pole over subwoofers. When using stands or poles, be sure to observe the following precautions: Check the stand or pole specification to be certain the device is designed to support the weight of the speaker. Observe all safety precautions specified by the manufacturer. Always verify that the stand (or subwoofer / pole) is placed on a flat, level, and stable surface and be sure to fully extend the legs of tripod type stands. Position the stand so that the legs do not present a trip hazard. Route cables so that performers, production crew, and audience will not trip and topple the speakers over. Inspect the stand (or pole and associated hardware) before each use and do not use equipment with worn, damaged, or missing parts. Do not attempt to place more than one MRX500 speaker on a stand or pole. Always be cautious in windy, outdoor conditions. It may be necessary to place additional weight (i. e. sand bags) on the base of the stand to improve stability. Avoid attaching banners or similar items to any part of a speaker system. [. . . ] If transportation of your JBL product presents any unusual difficulties, please advise us and we may make special arrangements with you. Otherwise, you are responsible for transporting your product for repair or arranging for its transportation and for payment of any initial shipping charges. However, we will pay the return shipping charges if repairs are covered by the warranty. Limitation of Implied Warranties ALL IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE LENGTH OF THIS WARRANTY. EXCLUSION OF CERTAIN DAMAGES JBL'S LIABILITY IS LIMITED TO THE REPAIR OR REPLACEMENT, AT OUR OPTION, OF ANY DEFECTIVE PRODUCT AND SHALL NOT INCLUDE INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND. [. . . ]