User manual JBL SFXHCP2

[. . . ] Connect the speakers to the receiver: red (+) on speaker to colored (+) on receiver and black (­) to black (­) (see page 17). Connect the Subwoofer Pre-Out jack to the Line-In jack on your subwoofer. Adjust the settings on the subwoofer later as needed (see page 17). [. . . ] FIGURE 3 ­ HOW TO USE THE BINDING-POST SPEAKER TERMINAL FM Antenna AM Antenna L R CD PLAYER Optical Coax COMP V2 COMP V1 REGION SELECTOR AUDIO RECORDER FIGURE 4 ­ AUDIO CONNECTIONS Dashed lines (­ ­ ­ ­) indicate coax and optical digital audio connections. Choose either type (but not both) for each digital audio source. REC/IN PLAY/OUT Step 4. Connect source components, as shown in Figures 4 and 5, and in the Device Connection Options chart on the back of this guide (see pages 17­18). AUDIO connections: Right channel (red) on source to right (red) on AVR, and left channel (white) on source to left (white) on AVR. DIGITAL AUDIO connections, if available: Choose either coax (orange) to coax (orange) OR optical to optical for each device. The Coax 1 input defaults to the DVD player, but may be reassigned. Assign the other digital inputs and outputs as appropriate for your equipment (see Step 8). VIDEO connections: Choose component (Y/Pb/Pr ­ green/blue/ red), composite (yellow) or S-Video (4-pin) for each video source. Otherwise, press the Speaker button and then the Set and arrow buttons to select the correct speaker choices for your system (see pages 24­26). Use EzSet to set output levels: Set the Balance to 12 o'clock, and the Volume to ­10dB. Sit in the listening position and hold the remote in front of you at shoulder level, pointing at the AVR580. Press the SPL button for 3 seconds, and release it when the LED flashes amber. Press "5" or "7" to indicate the number of speakers. Hold the remote steady until the process is completed (see pages 27­29). Your system is configured ­ sit back and enjoy! SPEAKER AND AUDIO CONNECTIONS VCR (Video 1) L In/Rec In R Video Video TV or Video Monitor (Video 3) S-Video Component Video Y Pb Pr Y Pb Cable or Sat or HDTV Set-Top Box (Video 2) Component Video Pr L Out R Video S-Video Out L R Optical Coax COMP V2 COMP V1 REGION SELECTOR Component Video L R Video S-Video Y Pb Optical Coax Pr FIGURE 5 ­ VIDEO CONNECTIONS Dashed lines (­ ­ ­ ­) indicate coax and optical digital audio connections. Choose either type (but not both) for each digital audio source. [. . . ] Choose either type (but not both) for each digital audio source. Dotted lines (····) indicate component, composite or S-Video connections. Component video is the preferred connection when available, but you may use any of the three types (but not more than one). [. . . ]