Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual JBL UREI 7510B. We hope that this JBL UREI 7510B user guide will be useful to you.
Lastmanuals help download the user guide JBL UREI 7510B.
Detailed instructions for use are in the User's Guide.
[. . . ] Specifications · 40W RMS x 2 @ 4 ohms and 1% THD + N* · 60W RMS x 2 @ 2 ohms, 14. 4V supply and 1% THD + N* · 120W RMS x 1 @ 4 ohms, 14. 4V supply and 1% THD + N* · Total peak power: 240 watts · Frequency response: 10Hz 100kHz (3dB)* · Maximum input signal: 6V* · Maximum sensitivity: 200mV* · THD + N: 0. 05% · Signal-to-noise ratio: 85dBA (reference 1W into 4 ohms)* · Signal-to-noise ratio: 101dBA (reference rated power into 4 ohms) * CEA-2006A-compliant 0 Speaker Output Connectors · Connect the speakers to these terminals, observing proper polarity. · Two-channel operation: Connect the left speaker to the L+ and L terminals and the right speaker to the R+ and R terminals. · One-channel (bridged) operation: Connect the single speaker to the R+ and L terminals. [. . . ] · One-channel (bridged) operation: Connect the single speaker to the R+ and L terminals. · Minimum speaker impedance for 2-channel operation is 2 ohms. Minimum speaker impedance for 1-channel (bridged) operation is 4 ohms. 1 Fuse · Replace only with the same type and rating. 2 Power Input Connectors · +12V: Connect to the positive terminal of the vehicle's battery. Install an appropriate fuse holder and fuse (15A minimum) within 18 inches of the battery. Make sure the wire is not damaged or pinched during installation. Install protective grommets when routing wires through the firewall or other sheet metal. E Input level is now adjusted correctly. B Setting the Crossover A Crossover setting for 5" or larger full-range speakers when no subwoofer is included in the system. B Crossover setting for midrange and/or full-range speakers when a subwoofer is included in the system. Note: Acceptable frequency ranges are indicated in gray.
Note: Remove any paint below ring connector.
Star Washer
· REM: Connect to the "Remote Out" lead from the source unit or to a source of switched 12V+ (ACC). 3 Input Connectors (RCA) · Connect to the RCA outputs from the source unit or signal processor. 4 Input-Level Control · Used to match the input level of the amplifier to the output level of the source unit. · See A for the adjustment procedure.
This product is designed for mobile applications and is not intended for connection to the mains. A valid serial number is required for warranty coverage. [. . . ] · See A for the adjustment procedure.
This product is designed for mobile applications and is not intended for connection to the mains. A valid serial number is required for warranty coverage. Features, specifications and appearance are subject to change without notice.
Declaration of Conformity
Harman Consumer Group, Inc. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE JBL UREI 7510B
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual JBL UREI 7510B will begin.
