Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual JBL UREI 813A. We hope that this JBL UREI 813A user guide will be useful to you.
Lastmanuals help download the user guide JBL UREI 813A.
Detailed instructions for use are in the User's Guide.
[. . . ] Specifications · 1200W RMS x 1 channel @ 4 ohms and 1% THD + N* · 1500W RMS x 1 channel @ 2 ohms, 14. 4V supply and <1% THD + N* · Frequency response: 20Hz 330Hz (3dB) · Maximum input signal: 6V* · Maximum sensitivity: 100mV* · THD + N: 0. 05% · Signal-to-noise ratio: 77dBA (reference 1W into 4 ohms)* · Signal-to-noise ratio: 108dBA (reference rated power into 4 ohms) * CEA-2006A-compliant Speaker Output Connectors · Connect the speakers to these terminals, observing proper polarity. Fuses · Replace only with the same type and rating. Power Input Connectors · +12V: Connect to the positive terminal of the vehicle's battery. [. . . ] Install an appropriate fuse holder and fuse (160A minimum) within 18 inches of the battery. Make sure the wire is not damaged or pinched during installation. Install protective grommets when routing wires through the firewall or other sheet metal. · GND: Connect to the vehicle's chassis. Factory Bolt Ring Connector Ground Wire DBO (Dynamic Bass Optimization) Variable Subsonic High-Pass Filter With Variable Boost (Q) · For woofers in tuned (vented) enclosures, set the Frequency control to a value 10Hz below the enclosure's resonance (tuned) frequency. · For woofers in sealed boxes, set the control to any value you prefer, between 30Hz and 50Hz. · Set the Boost control according to your preference, being careful not to apply enough boost to damage your woofer(s). Aux Output Connectors (RCA) · Nonfiltered pass-through output. Connect to the input of an additional amplifier. Input Connectors (RCA) · Connect to the RCA outputs from the source unit or signal processor. Input-Level Control · Used to match the input level of the amplifier to the output level of the source unit. · See for the adjustment procedure. Low-Pass Filter Frequency Control · 12dB/octave low-pass filter, variable from 32Hz to 320Hz. · See for the adjustment procedure.
This product is designed for mobile applications and is not intended for connection to the mains. [. . . ] Low-Pass Filter Frequency Control · 12dB/octave low-pass filter, variable from 32Hz to 320Hz. · See for the adjustment procedure.
This product is designed for mobile applications and is not intended for connection to the mains. A valid serial number is required for warranty coverage. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE JBL UREI 813A
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual JBL UREI 813A will begin.
