Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual JBL WBN26WHT. We hope that this JBL WBN26WHT user guide will be useful to you.
Lastmanuals help download the user guide JBL WBN26WHT.
Detailed instructions for use are in the User's Guide.
[. . . ] inches) or larger in diameter so that it can properly hold the backup cord eyelet (15).
Northridge Series WBN26 Bracket assembly and mounting:
IMPORTANT SAFETY NOTE: PROPER SELECTION OF MOUNTING HARDWARE NOT INCLUDED HEREIN AND PROPER ASSEMBLY AND INSTALLATION OF BRACKETS, INCLUDING BUT NOT LIMITED TO SELECTION OF APPROPRIATE WEIGHT BEARING SUPPORT AND BRACKET USE WITH THE SPECIFIED SPEAKER ONLY IS THE EXCLUSIVE RESPONSIBILITY OF THE CUSTOMER. MANUFACTURER DISCLAIMS ANY LIABILITY FOR THE SELECTION OF MOUNTING HARDWARE AND/OR BRACKET INSTALLATION. [. . . ] The remaining bracket-to-housing bolt (12) (bolts 11 and 12 are identical) will need to go through the eyelet (14) (eyelets 14 and 15 are also the same) at the end of the cord before going through the housing (10). Using a suitable screwdriver, tighten this bolt (12) also to the speaker housing (10). Using the wall bracket (16) as a template, mark the screw locations for where the unit is to be mounted. DO NOT MOUNT THE BRACKET TO THE WALL UNTIL STEP (i). The wall bracket (16) is to be mounted onto a wood stud on the wall, using #12, minimum 1 inch long, pan head wood screws. Make sure that all 4 screws are driven into the stud and not in drywall. If the bracket needs to be mounted on drywall, the use of properly selected and installed wall-anchors and screws is essential. Make sure that the screw head is at least 0. 41 inches (approximately 7/16
g. Remove the nut (19) and the split washer (18) if necessary. Fully insert the threaded portion (3) of the `thin' end of the ball/shaft (2) into the center opening (17) of the wall bracket (16), with the wall bracket middle area towards the threaded portion (3). Engage, and using a suitable wrench, securely tighten the split washer (18) and the nut (19), with the split washer (18) sandwiched between the area on the back of the wall bracket (16) and the nut (19). Mount the wall bracket (16) onto the wall, using three of the four #12 screws (20) (not supplied), while following the recommendations in item (f) above. [. . . ] Double-check and make sure both nuts (4 and 5) are fully tightened and that the speaker is stable on the bracket. The two nuts (4 and 5) should now be fully locked into position, and completely tightened against each other. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE JBL WBN26WHT
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual JBL WBN26WHT will begin.
