User manual JBSYSTEMS LIGHT DB-150 V 1.0

[. . . ] Don't place metal objects or spill liquid inside the unit. No objects filled with liquids, such as vases, shall be placed on this appliance. electric shock or malfunction may result. If a foreign object enters the unit, immediately disconnect the mains power. [. . . ] Improper installation can result in serious injuries and/or damage to property. overhead rigging requires extensive experience!Working load limits should be respected, certified installation materials should be used, the installed device should be inspected regularly for safety. Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging and servicing. Locate the fixture in a well ventilated spot, far away from any flammable materials and/or liquids. The fixture must be fixed at least 50cm from surrounding walls. The device should be installed out of reach of people and outside areas where persons may walk by or be seated. Before rigging make sure that the installation area can hold a minimum point load of 10times the device's weight. Always use a certified safety cable that can hold 12times the weight of the device when installing the unit. This secondary safety attachment should be installed in a way that no part of the installation can drop more than 20cm if the main attachment fails. The device should be well fixed; a free-swinging mounting is dangerous and may not be considered!Don't cover any ventilation openings as this may result in overheating. The operator has to make sure that the safety-relating and machine-technical installations are approved by an expert before using them for the first time. The installations should be inspected every year by a skilled person to be sure that safety is still optimal. SAFETY EYE: used to attach an optional safety cable when the DB-150 is fixed under ALU-truss (using clamps, also see n°8) Further shows the information related to the selected function or working mode. The left digit shows the channel number, the 3 other digits show the channel status: In the ADDRess menu: channel + DMX address is shown, ranging from 001 to 512 In the MODE menu: working mode is shown. ("DIM" = dimmer mode * "SW" = switch mode) In the ALONE menu and standard display: channel output status is shown. Channel in dimmer mode: dimmer percentage, ranging from 0% to 100% Channel in switch mode: "ON" = output 100% * "OFF" = output 0% Curve : shows the dimming curve that is used 13. MENU BUTTON: Please refer to the menu structure to understand the different menus. These are the different possibilities: Browse the main menu: Press the MENU button together with the UP/DOWN buttons. Return to the main menu: Press the MENU button to return to the main menu. DOWN BUTTON: Please refer to the menu structure to understand the different menus. [. . . ] Each channel can be set to a unique DMX-address. You can even give 2 or more channels the same DMX address. press the ENTER button to browse through the submenu. Once you selected the desired channel, press the UP/DOWN buttons to set the address Press the MENU button to return to the main menu. [. . . ]