User manual JBSYSTEMS LIGHT ILEAD CONTROLLER V1.1

[. . . ] Condense sometimes prevents the unit from working at full performance or may even cause damages. Don't place metal objects or spill liquid inside the unit. No objects filled with liquids, such as vases, shall be placed on this appliance. electric shock or malfunction may result. [. . . ] override: To override the fixture/ fixtures when the show is running. Button(1-24): Set DMX value 0~255 for channels of Shutter / Gobo / color / Rotation / Dimmer / Focus, or save 24 memories into the buttons. Stand alone: 2 extra easy controllers Incorporated for Master/Slave immediate pre-programmed light shows. program Mode: Activate Program mode by pressing Blackout/Stand Alone button. When the LED above the button is off, it's in Program mode. STAND ALONE: The connectors are used only in master/slave mode, using 5 pin XLR cable microphone jack of the first fixture, you will find that the remote control on the first unit will control all the other units for Stand by, Function and Mode. You can easily control pan, tilt, shutter, gobo, color, rotation, dimmer and focus functions on the lighting fixtures by pressing the relevant buttons showing on the control panel. With the use of joystick/ sliders, you will be able to quickly set the fixtures' Pan or Tilt position to make scenes. You can then save all these scenes step by step in a memory to create a chase (show). The controller allows you to program 24 chases with 485 programmable scenes maximum. PROGRAM MODE When power is turned on, the controller enters Programming mode automatically. The LED above this button lights off indicating Program mode in active. Hold on the BLACKOUT/STAND ALONE button for 3 seconds to enter StandAlone mode. Hold down the SCANNERS button and then press BLACKOUT/ STAND ALONE button. you will see the pan & tilt of all the fixtures in the chain stopping at the central position. The shutter & LED of the first fixture will open/ blink indicating the fixture is active, ready to be designated a new position ( the number in the chain ). If you have two chains in the venue, you can jog ( push ) joystick Left/Right to select chain 1 or chain 2, and jog joystick Up / Down to select next fixture or last fixture. BLACKOUT MODE Press the BLACKOUT/STAND ALONE button, the LED above this button lights up indicating Blackout in active. STAND ALONE MODE Hold on the BLACKOUT/STAND ALONE for 3 seconds, the LED above this button will blink indicating Stand-Alone mode in active. Press the BLACKOUT/STAND ALONE button again to return to the program mode. Different lights have different modes and different functions, which can be triggered by Stand Alone mode. Please refer to each lighting fixture's user manual for more details. [. . . ] Press the MEMORY button, choose the desired position (1 ~ 24) in which you want to insert a scene. Select the scene where you want to insert a scene. 6 ) repeatedly, you can view the scene one by one. Hold down PAGE and then press a button ( 1 ~ 24 ) where you want to copy the chase into it. [. . . ]