Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual JBSYSTEMS LIGHT LED NANO WASH. We hope that this JBSYSTEMS LIGHT LED NANO WASH user guide will be useful to you.
Lastmanuals help download the user guide JBSYSTEMS LIGHT LED NANO WASH.
Manual abstract: user guide JBSYSTEMS LIGHT LED NANO WASHV 1.1
Detailed instructions for use are in the User's Guide.
[. . . ] `t Hofveld 2 ~ B1702 Groot-Bijgaarden ~ Belgium Reproduction or publication of the content in any manner, without express permission of the publisher, is prohibited. Dispose of the unit and used batteries in an environment friendly manner according to your country regulations. [. . . ] the LED NANO WASH consumes about 0 , 25Watt/24Vdc or 1Watt/24Vac per unit. This means that you can put a lot of units on one power supply, however the maximum cable length between the LED power supply and the last unit in the chain is about 30m. We strongly suggest using our special LED power supply "LED-PSU 50W/24Vdc" (order code: 4935) for maximum reliability. however a simple 24Vac transformer is also possible. Connections: For outdoor installations: make sure to use waterproof junction boxes! aC Input (ordinary 24V transformer): connect all projectors in parallel to the transformer output. DC Input (LED-PSU 50W/24Vdc): connect all projectors in parallel to the PSU output BUT make sure that the positive (red wire) and negative (black wire) poles of the projectors are connected in the right way to the corresponding wires of the PSU see drawing!After checking that the maximum allowed power is not exceeded, you can connect the chain to the LED Manager and switch it on. MECHANICAL INSTALLATION Many possibilities: you can simply drill a hole (ex. In a wooden surface) and press/click the LED projector inside or you can install the projector in concrete floors, using an M40 Cable protection pipe (Diameter = 36mm) to protect the projector. For outdoor installations, make sure to use waterproof junction boxes. CARACTERISTIQUES Connexions : Tension de service: Consommation: CORDON SECTEUR : Angle de dispersion: IP rating (indice de protection) : Poids : Dimensions : Câble standard de 2 x 0, 75 mm² 24Vcc (LED-PSU 50W/24Vdc) 24Vca (transformateur standard 24V) 24Vdc 0, 25 Watt/appareil 24Vac 1 Watt/appareil 1 m, de type spirale wash IP68 (immersion complète) 0, 25 kg se reporter à la figure Every information is subject to change without prior notice SAFETY INSTRUCTIONS: To protect the environment, please try to recycle the packing material as much as possible. [. . . ] In a wooden surface) and press/click the LED projector inside or you can install the projector in concrete floors, using an M40 Cable protection pipe (Diameter = 36mm) to protect the projector. For outdoor installations, make sure to use waterproof junction boxes. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE JBSYSTEMS LIGHT LED NANO WASH
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual JBSYSTEMS LIGHT LED NANO WASH will begin.
