User manual JBSYSTEMS LIGHT LED WALL DIMMER V 1.0

[. . . ] Due to safety reasons it is prohibited to make unauthorized modifications to the unit. This product meets the requirements of the current European and national guidelines. Sends 4 standard DMX-channels: R + G + B + master dimmer Easy wall mounting, fits in any standard recessed wall box Perfect for use in LED installations for hotels, homes, shops, . Several wall dimmers can be combined together in bigger installations Comes with 2 different cover plates 3 different working modes for maximum flexibility. [. . . ] The dealer will not accept responsibility for any resulting defects or problems caused by disregarding this user manual. Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user manual. To protect the environment, please try to recycle the packing material as much as possible. This symbol means: indoor use only This symbol means: Read instructions To prevent fire or shock hazard, do not expose this appliance to rain or moisture. To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when bringing it into a warm room after transport. Condense sometimes prevents the unit from working at full performance or may even cause damages. Don't place metal objects or spill liquid inside the unit. No objects filled with liquids, such as vases, shall be placed on this appliance. electric shock or malfunction may result. If a foreign object enters the unit, immediately disconnect the mains power. No naked flame sources, such as lighted candles, should be placed on the appliance. Prevent use in dusty environments and clean the unit regularly. ANY OTHER JB SYSTEMS LED PRODUCT: ® You can also use it together with other JB Systems LED products like LED Ball, LED Par, LED SPOT/WASH, LED MANAGER 300W, . However in these cases you will need a separate +12Vdc power supply connected to the Wall Dimmer. the DMX outputs will be connected via a good quality balanced DMX- cable and XLR-connector. The connected LED product should be assigned to DMX address 001. MECHANICAL INSTALLATION IN WALL BOX: The LED Wall Dimmer can be installed in any standard recessed wall box with screw fixations: Take the cover plate off (easy click-on system) Locate the unit in the recessed wall box and fasten with the 2 screws. [. . . ] You can also use these buttons to choose one of the 3 working modes of the wall dimmer: MEMORIZE A SCENE: use the 2 knobs (1) and (2) to set the right light atmosphere. To memorize this setting for future use, just press the M1 or M2 button until the STANDBY LED (3) blinks shortly. You can do the same for the other memory button. sELECT WORKING MODES: see specifications for the exact DMX-channel distribution. [. . . ]