User manual JBSYSTEMS LIGHT LED WATER WAVE V 1.0

[. . . ] A new light effect sometimes causes some unwanted smoke and/or smell. This is normal and disappears after some minutes. To prevent fire or shock hazard, do not expose this appliance to rain or moisture. To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when bringing it into a warm room after transport. [. . . ] Due to safety reasons it is prohibited to make unauthorized modifications to the unit. Important: Never look directly into the light source!Don't use the effect in the presence of persons suffering from epilepsy. This product meets the requirements of the current European and national guidelines. conformity has been established and the relevant statements and documents have been deposited by the manufacturer. This device has been designed to produce decorative effect lighting and is used in light show systems. LED Water wave combines the latest LED technology and excellent optics to project very realistic water waves in ever changing colors. based on 10WATT "CREE" LED technology: Very low power consumption (money saving!) Extremely brilliant colors compared to units with halogen lamps No lamp replacements! virtually no heat production Lightweight (no lamp transformers needed) Completely silent , no noisy fans needed!Equipped with 2 special frost filters 6 slowly changing dichroic colors Switch to stop the color wheel on a desired color. Before you start using this unit, please check if there's no transportation damage. Should there be any, do not use the device and consult your dealer first. Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary for the user to strictly follow the safety instructions and warnings in this user manual. Any damage caused by mishandling are not subject to warranty. The dealer will not accept responsibility for any resulting defects or problems caused by disregarding this user manual. Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user manual. CAUTION: To reduce the risk of electric shock, do not remove the top cover. The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the use or the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. Make sure the area below the installation place is free from unwanted persons during servicing. [. . . ] The installations should be inspected every year by a skilled person to be sure that safety is still optimal. Mains Input: Power consumption: Fuse: Sound Control: Beam angle: Lamp: Size: Weight: AC 230V, 50Hz 20W 250V~ 500mA slow blow (20mm glass) --34° 10Watt white CREE LED see drawing 3, 5kg Once connected to the mains the device starts running. Do not switch the unit on and off in short time intervals as this reduces the life of the unit. Always unplug the unit when it is not used for a longer time or start servicing. [. . . ]