User manual JBSYSTEMS LIGHT MCD 1.1 V1.0

[. . . ] Dispose of the unit and used batteries in an environment friendly manner according to your country regulations. Thank you for buying this JB Systems® product. To take full advantage of all possibilities, please read these operating instructions very carefully. This appliance meets the requirements of the current European and national guidelines. [. . . ] In this manual we talk about "line inputs". This is a global name for inputs with a level between 750mV and 2V. SEARCH WHEEL (OUTER RING): This wheel has 4 forward and 4 backward speed positions for searching through songs. The more you turn the wheel in either direction the faster you will search through the music. JOG WHEEL (INNER RING): This jog wheel serves 2 functions depending on the mode you are working in. The jog wheel acts as a slow frame search (1/75sec) control when the CD is not playing but either paused or set to a cue point. To set a new cue point, spin the wheel and press PLAY when you have determined the proper position. press CUE to return to the "CUE POINT". The jog wheel temporarily bends the pitch of the music up to +/-16% if the song is already playing by rotating the wheel clockwise to speed up or counterclockwise to slow down. TRACK SEARCH Buttons: These buttons are used to select the track to be played. CUE button: Pressing the CUE button during play provides an immediate return to the position at which play was started. Playback is started immediately from the programmed cue point for as long as the CUE button is pressed. The CD player jumps back to the cue point as soon as the CUE button is released. Also with the unit in pause mode (Play/Pause LED blinks) the search and/or jog wheel is used to set a different start point. By pressing "PLAY/PAUSE" button then "CUE", you can confirm this new cue point. The CUE LED will light up since the cue button is pressed until the CD has returned to the position at which play was started. PLAY/PAUSE button: every time you press the PLAY/PAUSE button the CD player changes from play to pause or from pause to play. PITCH BEND buttons: The speed rises while the "+ button" is pressed and return to the original pitch when the button is released. The pitch drops when the "­ button" is pressed and returns to the original pitch when the button is released. These buttons can be used to synchronize the beats of 2 tracks. PITCH button: This button is used to turn the Pitch function on and off. If you want to change the speed adjustment range (+/- 8%, +/- 12% , +/- 16%), press and hold PITCH button then press the PITCH BEND+ to select. [. . . ] Otherwise the CD will play continuously through all tracks. 64/64 character style mode-1 only 255 999 255 mono / stereo sampled at: 32 - 44, 1 - 48kHz 32 ­ 320 Kbps CBR (Constant Bitrate) or VBR (Variable Bitrate) mono / stereo sampled at: 16 ­ 22, 05 - 24kHz 8 ­ 160 Kbps CBR (Constant Bitrate) or VBR (Variable Bitrate) mono / stereo sampled at: 8 ­ 11, 025 - 12kHz 8 ­ 160 Kbps CBR (Constant Bitrate) or VBR (Variable Bitrate) 482(W) x 88. Most of the common functions are explained in the previous chapter "controls and functions" In this chapter we talk about the functions that need a little more explanation. 1 is able to read several different MP3 formats but due to display limitations it can't show the ID3-tags (song title/performer/. [. . . ]