User manual JBSYSTEMS LIGHT MCD 150 V1.1

[. . . ] Reproduction or publication of the content in any manner, without express permission of the publisher, is prohibited. Dispose of the unit and used batteries in an environment friendly manner according to your country regulations. Thank you for buying this JB Systems ® product. To take full advantage of all possibilities, please read these operating instructions very carefully. [. . . ] The player waits at the first music note of each track. This means that badly indexed CDs will not interfere with the instant start capabilities of this CD player. This is a very useful feature for deejays!CUE/STUTTER button: Has 2 functions, depending on the playback status: STUTTER function: Pressing the CUE button during playback provides an immediate return to the preprogrammed cue point. Playback starts immediately from the programmed cue point each time the CUE button is pressed causing a stutter effect in both normal and loop playback mode. CUE function: Pressing the CUE button during pause provides an immediate return to the preprogrammed cue point. playback starts immediately for as long as the CUE button is pressed. The CD player jumps back to the cue point as soon as the CUE button is released. Please read the chapter called "How to use" to learn how to set a cue point. PLAY/PAUSE button: Every time you press the PLAY/PAUSE button the CD player changes from play to pause or from pause to play. CUE button: Allows you to set the cue point without stopping the playback (CUE ON THE FLY). This button also sets the beginning of a seamless loop. The player starts the seamless loop until you press this button again to exit. When a loop is programmed but not active you can also restart the loop (RELOOP function). SEARCH buttons: These buttons are used to search inside a track. The search speed increases when you press the buttons for a longer time. TRACK SEARCH Buttons: These buttons are used to select the track to be played. Refer to the next chapter for more information. TIME Button: The TIME button switches between elapsed playing time, remaining time in a selection and total remaining time of the disc. PITCH BEND buttons: The speed rises while the "+ button" is pressed and returns to the original pitch when the button is released. The speed drops when the "­ button" is pressed and returns to the original pitch when the button is released. These buttons can be used to synchronize the beats of 2 tracks. [. . . ] If the disc is multi session, it will only play the first session: if the first session is CD-DA you can only play CD-DA tracks. If the first session is MP3 you can only play MP3 files. SLEEP MODE: The CD player automatically shuts off the transport and laser after about 15 minutes (when in pause or cue mode). This extends the life of your motor drive and laser. [. . . ]