User manual JBSYSTEMS LIGHT MINI DMX SPLITTER V1.0

[. . . ] 3. 8--ID. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3. 9--EDIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11. 3. 10--SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12. 3. 11--PASSWORD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12. [. . . ] 3. 12--SAVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12. LED module on, 1) MAIN PCB damaged LEDs of all colors 2) LED PCB damaged are not lit 1) Signal connection error Display normal, but no response to DMX 512 controller 2) DMX Address error 3) Master & slave mode error 3) Check and reset the working mode 4) ID error 4) Check and reset ID address PART 4 USING A DMX512 CONTROLLER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13. 4. 1--BASIC ADDRESSING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13. 4. 2--CHANNEL ASSIGNMENT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13. 4. 3--BASIC INSTRUCTIONS FOR DMX512 OPERATION (STAGE 1). . . . . 16. PART 5 APPENDIX. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17. 5. 1--TROUBLE SHOOTING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17. 5. 2--MAINTENANCE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18. 5 APPENDIX 17 2009. 12. 9 4. 3 BASIC INSTRUCTIONS FOR DMX512 OPERATION (STAGE 1) MASTER DIMMER CH1 controls the intensity of the currently projected color When the slider is at the highest position (255) the intensity of the output is the maximum RED, GREEN & BLUE COLOR SELECTION CH2, CH3 & CH4 control the intensity ratio of each of the RED, GREEN & BLUE LEDs. When the slider is at the highest position (255) the intensity of the color is the maximum. CH2, CH3 & CH4 can be combined together to create over 16 million colors. COLOR MACROS CH5 selects the required COLOR MACRO CH5 has priority over CH2, CH3 , CH4 and CH6 CH1 is used to control the intensity of the COLOR MACRO STROBE CH 6 controls the strobe of CH1 to Ch5 1 1. 1 PRODUCT (GENERAL) PRODUCT INTRODUCTION This product is designed for indoor use. Suitable applications include wash or effect lighting for architectural, stage or nightclub applications. This product can also be installed for use in signage and advertising using the dynamic functions available with DMX512 control. In order to maintain this condition and for safe operation, the user must always follow the instructions and safety warnings described in this user manual. Avoid shaking or strong impacts to any part of the equipment. Make sure that all parts of the equipment are kept clean and free of dust. Always make sure that the power connections are connected correct and secure. If there is any malfunction of the equipment, contact your distributor immediately. When transferring the product, it is advisable to use the original packaging in which the product left the factory. Shields, lenses or ultraviolet screens shall be changed if they have become damaged to such an extent that their effectiveness is impaired. The lamp (LED) shall be changed if it has become damaged or thermally deformed. 0 11 36 61 86 111 136 161 186 10 35 60 85 110 135 160 185 210 215 220 225 230 235 240 245 250 255 No function RED 100% / GREEN UP / BLUE 0% RED DOWN / GREEN 100% / BLUE 0% RED 0% / GREEN 100% / BLUE UP RED 0% / GREEN DOWN / BLUE 100% RED UP / GREEN 0% / BLUE 100% RED 100% / GREEN 0% / BLUE DOWN RED 100% / GREEN UP / BLUE UP RED DOWN / GREEN DOWN / BLUE 100% WHITE 1: 3200K WHITE 2: 3400K WHITE 3: 4200K WHITE 4: 4900K WHITE 5: 5600K WHITE 6: 5900K WHITE 7: 6500K WHITE 8: 7200K WHITE 9: 8500K STROBE 5 211 216 221 226 231 236 241 246 251 6 0 11 10 255 No function Strobe speed 1 PRODUCT(GENERAL) 4 2009. 12. 9 4 USING A DMX512 CONTROLLER 13 2009. 12. 9 3. 10 MENU SETTINGS SETTINGS ID ON/OFF Reset to Factory?Up load costom? 2 2. 1 UC OFF INSTALLATION MOUNTING HANGING The LED PAR can be mounted in a hanging position using the supporting bracket. The bracket should be secured to the mounting truss or structure using a standard mounting clamp. Please note that when hanging the unit a safety cable should also be used. COLOR ID Choose ON / OFF to open or close ID Reset to Factory? [. . . ] Please note that when hanging the unit a safety cable should also be used. COLOR ID Choose ON / OFF to open or close ID Reset to Factory?This function will reset all setting to the original factory setting Up load custom?to upload the custom programs from the current MASTER unit to the SLAVE units COLOR is f ora ctivate/unactivate t hec olorc alibrationf unctions. When [UC] is selected, the RGB output are adjusted to a standard preset universal color which balances fixtures from different generations. . [. . . ]