User manual JBSYSTEMS LIGHT MIRROR BALL 20CM V1.1

[. . . ] To take full advantage of all possibilities and for your own safety, please read these operating instructions very carefully before you start using this unit. This product meets the requirements of the current European and national guidelines. conformity has been established and the relevant statements and documents have been deposited by the manufacturer. This device has been designed to produce decorative effect lighting and is used in light show systems. [. . . ] Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging and servicing. The device should be installed out of reach of people and outside areas where persons may walk by or be seated. Before rigging make sure that the installation area can hold a minimum point load of 10times the device's weight. Always use a certified safety cable that can hold 12times the weight of the device when installing the unit. This secondary safety attachment should be installed in a way that no part of the installation can drop more than 20cm if the main attachment fails. Make sure that the chain used to hang the mirror ball can hold at least 12times the weight of the mirror ball. the length of the chain must never exceed 100cm. If you use a mirror ball motor, make sure to use an appropriate motor that can hold the weight of the mirror ball. In order to have a safe installation, you MUST follow the installation instructions supplied with the mirror ball. Make sure the rotation of the mirror ball is never slowed down or stopped by surrounding materials. The operator has to make sure that the safety-relating and machine-technical installations are approved by an expert before using them for the first time. The installations should be inspected every year by a skilled person to be sure that safety is still optimal. To protect the environment, please try to recycle the packing material as much as possible. Don't place metal objects or spill liquid inside the unit. electric shock or malfunction may result. If a foreign object enters the unit, immediately disconnect the mains power. Prevent use in dusty environments and clean the unit regularly. Inexperienced persons should not operate this device. [. . . ] When an optical mirror is visibly damaged due to cracks or deep scratches, it must be replaced. The cleaning of the optical mirrors must be carried out periodically to optimize light output. Cleaning frequency depends on the environment in which the fixture operates: damp, smoky or particularly dirty surroundings can cause greater accumulation of dirt on the unit's optics. Clean with a soft cloth using normal glass cleaning products. [. . . ]