Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual JBSYSTEMS LIGHT MX-V30. We hope that this JBSYSTEMS LIGHT MX-V30 user guide will be useful to you.
Lastmanuals help download the user guide JBSYSTEMS LIGHT MX-V30.
Manual abstract: user guide JBSYSTEMS LIGHT MX-V30
Detailed instructions for use are in the User's Guide.
[. . . ] Before connecting and operating the unit, check if the voltage setting is conform to the voltage available in your area. The wireless microphone system operates on VHF band frequency 160-250 MHz with quartz locked control. Please read this instruction manual completely before operating the system. [. . . ] When the microphone is transmitting the signal, the red light of the RF signal wil light to indicate that the mic is operating. The squelch level is adjustable by the squelch adjustment at the back of the unit, adjust the output level to prevent external noise. (Setting the squelch too high will reduce the range of the system). When the receiver is not used, revolve the volume switch to the minimum and turn the power off. Special noise absorption parts inside the barrels, which eliminate switch shock noise and handling noise. Open the battery cover and insert battery into the battery house according (+) and (-) indications marked on the battery house. Push the power switch ON, the LED indicator will flash to indicate that the carrier frequency is sending out. Switch the power ON, the LED indicator flashing means that power supply is normal. If the LED indicator lights up it means that the battery needs to be replaced. If there's no flashing, then there's no battery inserted or it isn't properly inserted. Push the power button OFF when the microphone isn't used and remove the battery in the microphone if not used for a long time. This will prevent any damage that a defective `leaking' battery may cause. ) : More than 43 dB below carrier frequency : Within ±0. 005 % with quartz control : Built in : 40 Hz to 15 KHz (± 3 dB) : ± 15 KHz within limiting compressor : 60 dB (A-weighted) : Uni-directional dynamic microphone : Standard 9 V battery : About 25 mA : Over 6 - 8 hours continuous operation by Alkaline Battery : Power On - Off and low battery : Handheld mic: 56 diam. Please take time to read this manual before asking after service and check following points. If it contains unusual things please contact your purchasing store. [. . . ] When you live in this area, please ask for microphones with another frequency. Declare, under our own responsability, that the product: Brand: JB Systems Type: MR-S06 + MX-V30 on which this declaration has effect, complies with the essential requirements, and other relevant statements of the R & TTE Declaration (1999/5/EC). The product is conform with the following norms: Safety (art 3. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE JBSYSTEMS LIGHT MX-V30
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual JBSYSTEMS LIGHT MX-V30 will begin.
