User manual JBSYSTEMS LIGHT ORION LED V 1.0

[. . . ] Reproduction or publication of the content in any manner, without express permission of the publisher, is prohibited. Dispose of the unit and used batteries in an environment friendly manner according to your country regulations. Thank you for buying this JB Systems product. To take full advantage of all possibilities and for your own safety, please read these operating instructions very carefully before you start using this unit. [. . . ] Don't cover any ventilation openings as this may result in overheating. The operator has to make sure that the safety-relating and machine-technical installations are approved by an expert before using them for the first time. The installations should be inspected every year by a skilled person to be sure that safety is still optimal. Whit the optional CPB-4 "Centerpiece bracket" you can make a fantastic combination of 4pcs ORION led. The result is a superb LED Centerpiece effect, really a must if you want an original and eye-catching effect!Mains input with IEC socket, connect the supplied mains cable here 2. Mains output with IEC socket: you can use a special IEC power cable to connect this output with the mains input of the next Orion for easier linking. Hanging bracket with 2 knobs on both sides to fasten the unit and a mounting hole to fix a mounting hook. Slave LED: is lit when the unit is in slave mode 11. Sound LED: blinks to the rhythm of the music while the unit is in audio mode 12. DMX LED: is lit when the unit receives a DMX-signal 13. Master LED: is lit when the unit is switched as master 14. MENU button: used to select the different menu items 15. DOWN button: to go back in the menu and to lower the values shown on the display. ENTER button: used to confirm your choice. MAIN MENU: To select any of the menu options, press the MENU button up to when the required one is shown on the display. Use DOWN and UP button to choose the desired menu option. once the required menu option is selected , press the ENTER button to select. To go back to the functions without any change press the MENU button or just wait 8 seconds. Show Mode Used to choose to select one of the preprogrammed shows when used in standalone or master/slave mode. This menu option is not available when the unit is set to slave mode ("S L 1 " or "S L 2 ")!Use DOWN and UP buttons to select one of the preprogrammed shows (show 0) to 12) or S hL O (slow mode) Once the right show blinks on the display, press the ENTER button to save it. [. . . ] mASTER has 12 built-in shows: You can select (show 0) to (show 12) or S hL O directly in the menu of the master. SLAVES have 2 working options: These units are set to slave mode (slave-LED is constantly on). In order to create a great light show you can introduce contrast movements In the menu of the slave units you can go to option and select: o Normal slave: slave works in sync with the master. O 2 light show: slave works in opposite with the master. [. . . ]