User manual JBSYSTEMS LIGHT Q1 USB V1.0

[. . . ] `t Hofveld 2C ~ B1702 Groot-Bijgaarden ~ Belgium Reproduction or publication of the content in any manner, without express permission of the publisher, is prohibited. Dispose of the unit and used batteries in an environment friendly manner according to your country regulations. Head shell Operating instructions Cartridge RCA/RCA audio cable Dust cover USB cable Thank you for buying this JB Systems product. To take full advantage of all possibilities, please read these operating instructions very carefully. [. . . ] Placing and using the turntable for long periods near heat-generating sources such as amplifiers, spotlights, etc. When the turntable is used in a loud-sound environment, for example near speakers, sound skip and feedback may occur. Install the unit on a perfectly horizontal and very stable surface. Be sure the turntable, including its audio and mains cords, does not touch any vibrating materials. Take special care when using the unit while it is installed in a carrying case. CLEANING THE TURNTABLE: Clean by wiping with a cloth slightly dipped with water. Do not use volatile liquids such as benzene or thinner which will damage the unit. This makes it easier to manipulate the record for scratch performances. Do not forget to attach rubber belt to motor otherwise the platter will not rotate!After placing the platter onto the turntable through the Center Spindle, move one of the large holes on the platter to top right corner. TARGET LIGHT: Target light used to locate the exact place on your record when used in a dark place. SINGLE ADAPTER: Place this adapter on the platter for playing 7" records with large center holes. PHONO/LINE SWITCH: Depending on the position of the phono/line switch, you can connect the turntable to any phono or line level input. PHONO/LINE OUTPUT: Connect the turntable to any phono or line level input. Be sure to put the phono/line switch in the correct position. To start playback, gently place the stylus on the record using the head shell finger support. Do not drop the stylus onto the record as this may cause damage to the diamond tip and to the record. For the correct stylus pressure, please refer to the user manual of your cartridge. Setting up the stylus pressure: Make sure the cartridge is well fitted and its needle protector is removed. Put a record on the platter and make sure the anti-skate is set to zero. put the tone arm lever in "down" position. Take the tone arm and turn the counter- weight until the tone arm is in perfect balance It floats horizontally above the record surface, see "OK" picture at the right. [. . . ] Net/ and save the setup-file on your computer Double-click the Audacity Setup file Follow the instructions on your screen 3. SAVING A TRACK: You can save a file in different ways. You can choose in which format you want to save your file. Important remark: To be able to save your recording as an MP3 file you have to install the optional encoder first. [. . . ]