User manual JBSYSTEMS LIGHT RS-15 V1.1

[. . . ] Reproduction or publication of the content, even portions, in any manner, without express permission of the publisher, is prohibited. Dispose of the unit and used batteries in an environment friendly manner according to your country regulations. Congratulations and thank you for buying this SYNQ product. [. . . ] Always mount this speaker in safe and stable way. Take special care when the cabinets are suspended. This is potentially dangerous and should only be carried out by technicians who have perfect knowledge of the techniques and regulations of rigging speakers!Both connectors are connected in parallel. This means that you can connect a second RS15 in parallel. ® Speakon wiring is made as follows: POSITIVE = +1 NEGATIVE = -1 Attention: when a second speaker is connected, the impedance drops from 8 to 4!In most cases you can only connect 2 cabinets together. However, if your amplifier supports 2 loads, you can connect up to 4 cabinets to each amplifier output. Cables to be used: You can use readymade cables but of course you can also assemble the speaker cables yourself. Take care to use good quality speaker cable with at least 2x 2. You will also need a pair of Neutrik Speakon® NL4FC connectors. Your speaker cable has 2 conductors with different colors. Be sure to connect the same color on each side of the cable to the corresponding contact!If you inverse the conductors, poor sound quality with a lack of low frequencies will be the result. These can be used to suspend (fly) the cabinet. For this purpose you can use the different optional flying hardware as shown on the picture. [. . . ] Ook als podium monitor te gebruiken Zeer stevige multiplex behuizing: krasvaste lak Ophangpunten(rigging) 35mm speaker adapter with 2 horizontal positions Stalen front grill met akoestisch shuim aan de binnenkant Uitgerust met: Een High power 2" driver voor de hoge frequenties Een High power 15" woofer met aluminium frame Kan perfect gecombineerd worden met de RS-218B (high power 2x18" subwoofers) Deze bevat 2 stuks van model "1" en 2 stuks van model "2" zoals hieronder afgebeeld. Kann als Bühnen Monitor verwendet werden Sehr solides Sperrholzgehäuse mit: Dauerhafter kratzfester Lackierung Solider Gummifuß verschiedeneHängepunkte 35mm Lautsprecher Stativ Adapter mit 2 horizontalen Possitionen Stahlgitter vorne mit Akustik Schaumstoff auf der Innenseite Bestückt mit: High power 2" Hochtontreiber High power 15" Woofer mit Aluminium Korb Dieses System ist ideal kombinierbar mit dem RS-218B (Hochleistungssubwoofer 2x18") RIG-RS15, a special rigging kit for one RS15 cabinet, can be ordered separately. It contains 2pcs M10 eye bolts (1) + 2pcs single stud fitting (2). [. . . ]