User manual JBSYSTEMS LIGHT SMX.3 V1.0

[. . . ] Reproduction or publication of the content, even portions, in any manner, without express permission of the publisher, is prohibited. Dispose of the unit and used batteries in an environment friendly manner according to your country regulations. Congratulations and thank you for buying this SYNQ product. Please read these operating instructions carefully so you will know how to operate this product properly. [. . . ] In sampler function you can't use the internal effects but you can connect any external effects processor using the effect send/return connectors (46/47). You can easily mix beat synchronized echos while selecting the desired "preset"(23). These presets can be tuned with the "Xparameter knob"(24) in a range from 2mSec up to 2Sec. With the "Y-parameter knob"(25) you can change the balance between the original and the delayed sound. AUTO PAN: Sweeps the music from left to right and back to the rhythm of the beat. With the "presets"(23) you can choose how fast the music sweeps from one side to the other. (example: With preset "2" it will take 2beats to go from left to right and back) The presets can be tuned with the "X-parameter knob"(24) in a range from 30mSec up to 16Sec. With the "Y-parameter knob"(25) you can adjust how quick the music will be panned to the opposite side: you can choose for a gently pan or an aggressive one. fLANGER: This effect is best described as "putting a jet engine in the music". It's as if the music turns around due to phase shifting. You can easily change the flanger time (cycle) with the "presets"(23). These presets can be tuned with the "X-parameter knob"(24) in a range from 100mSec up to 16Sec. With the "Yparameter knob"(25) you can change the flanger feedback level. Hint: Every time you push the same preset button(23) you will restart the flanger cycle. This gives a nice "extra touch" to the effect. Hint: use the pitch shifter on a micro and you have a voice changer. (with pitch at -100% you obtain voices from the "dark side of this world" ) The mixer comes with 5 standard filter presets but you can easily adjust these presets(23) with the "X-parameter knob"(24) in a range from low pass filter (LPF) @ 50Hz (display shows: L 0. With the "Y-parameter knob"(25) you can change the filter resonance level. (This is the Q-factor of the filter , it changes the impact of the filter on a selected frequency). You can replace the standard presets with your own parameters, simply by pressing the "X-parameter knob"(24) and one of the 5 preset buttons (23) together. aUTO FILTER: This is an automatic low pass filter (LPF). The cutoff frequency varies in cycles from 20kHz down to 50Hz. [. . . ] The display shows the software version for both the microprocessor and the DSP: check the drawing for more information. 5 HOW TO UPGRADE THE PROCESSOR SOFTWARE: Put the SDTM/SDHCTM-card in your PC and copy the file called "SMX-3C_xx. Put the SDTM/SDHCTM-card in the memory slot (28) of the SMX-3. Turn the mixer on while you keep the 3 buttons pressed. [. . . ]