User manual JBSYSTEMS LIGHT USB 2.2 V1.0

[. . . ] Dispose of the unit and used batteries in an environment friendly manner according to your country regulations. Check the contents: Check that the carton contains the following items: Main unit Control unit Operating instructions 2 cinch cords 1 mini-DIN8 cable 1m 2 fader start cables 1 power cord Thank you for buying this JB Systems product. To take full advantage of all possibilities, please read these operating instructions very carefully. This appliance meets the requirements of the current European and national guidelines. [. . . ] The speed will not change when the pitch range LED is off. PITCH BEND buttons: The speed rises while the "+ button" is pressed and returns to the original pitch when the button is released. The speed drops when the "­ button" is pressed and returns to the original pitch when the button is released. These buttons can be used to synchronize the beats of 2 tracks. RELAY button: you can select 3 different random play functions. total random: press the RELAY button shortly until the LED is lit. Player 1 now plays tracks, randomly selected from the complete USB-mass storage. While player 1 is playing in random mode, player 2 can still be used to play any track you like. Directory random: you can choose to play only tracks from a certain directory: first you have to select this directory, then press the RELAY button for +/-2seconds until the LED starts blinking. Player 1 now plays only tracks from the selected directory. (avoids mix-up of 2 completely different music styles: perfect for bars, clubs, restaurants, . ) See chapter "HOW TO USE" for examples. CD random: first put 2 CDs in the unit, now press the RELAY-button shortly: alternately a track will be played from both CDs until the relay function is disengaged. You can always put a new CD in the player that is waiting in standby mode. In this way you can create an endless program. OPEN/CLOSE/LOAD TRACK button: used for two different functions. Load a track from USB-drive: when the DATABASE/NEXT TRACK-button (10) is used to lookup the next track, just press the LOAD TRACK button to load the selected track. Load/eject CDs: press this button to open and close the disc tray. These buttons are disabled during playback. You can only select another source while the player is in stop or pause. TIME Button: has different functions: Change time display: The TIME button switches between elapsed playing time, remaining time in a selection and total remaining time of the disc. Close setup menu: press the ENTER button shortly to leave setup. [. . . ] If the disc is multi session, it will only play the first session: if the first session is CD-DA you can only play CD-DA tracks. If the first session is MP3 you can only play MP3 files. ABOUT LOOPS: CREATE A LOOP: While a track is playing, press the LOOP IN button to program the start point of the loop. (With some practice you will be able to create perfect loops! [. . . ]