Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual JBSYSTEMS HZ 100. We hope that this JBSYSTEMS HZ 100 user guide will be useful to you.
Lastmanuals help download the user guide JBSYSTEMS HZ 100.
Detailed instructions for use are in the User's Guide.
[. . . ] Prior to use, we suggest that you carefully read all of the instructions. By following the suggestions found in this user manual, you can look forward to the reliable and satisfactory performance of your ANTARI Hazer for years to come. Please follow these operation and safety instructions to ensure a long and safe life for your hazer. Cautions Do not overfill your ANTARI hazer. [. . . ] Unpacking & Inspection Open the shipping carton and verify that all equipment necessary to operate the system has arrived intact. If any equipment is missing contact your ANTARI dealer immediately. Before beginning initial setup of your ANTARI Hazer, make sure that there is no evident damage caused by transportation. In the event that the unit's housing or cable is damaged, do not plug it in and do not attempt to use it until after contacting your ANTARI dealer for assistance. Pour hazer liquid into the liquid tank, being careful not to exceed the maximum fluid level. Use only ANTARI Hazer Liquid or other dealer-recommended high-quality hazer fluid . Any other types of fluid can damage the unit. When liquid level reaches the fill line, place cap back on liquid tank. Your hazer may be operated with or without a remote controller. If you will be controlling your unit remotely, firmly attach the remote control cable to the proper input. Operation Plug power cord into a grounded electrical outlet. To operate without remote control, simply turn hazer on. For further information on operating your ANTARI Hazer, see the section titled, "Remote Control Operation". If your model includes a mounting bracket designed for overhead installation, it may be installed at floor level or suspended overhead. If the unit is to be mounted using the bracket, avoid suspending the unit such that haze is emitted directly toward any one's face. Whatever installation method you choose, do not allow the unit to have more than a 15 degree angle of inclination. Running a hazer with no fluid can permanently damage the unit. If you experience low output, mechanical noise or no output at all, unplug immediately. Check fluid level, the external fuse, remote connection, and power from the wall. Does not function after 30 seconds, discontinue operation or permanent damage to the unit may result. [. . . ] If Channel A has a value from 0 to 5, the unit is OFF. between the values 6 to 249 the HZ-400 produces haze. Hazer Liquid Do not allow the hazer liquid to become contaminated. Always replace the caps on the hazer liquid container and the hazer's liquid tank immediately after filling. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE JBSYSTEMS HZ 100
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual JBSYSTEMS HZ 100 will begin.
