Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual JBSYSTEMS LS-RGB-DMX CONTROL. We hope that this JBSYSTEMS LS-RGB-DMX CONTROL user guide will be useful to you.
Lastmanuals help download the user guide JBSYSTEMS LS-RGB-DMX CONTROL.
Manual abstract: user guide JBSYSTEMS LS-RGB-DMX CONTROLV 1.0
Detailed instructions for use are in the User's Guide.
[. . . ] Prevent use in dusty environments and clean the unit regularly. Inexperienced persons should not operate t this device. maximum save ambient temperature is 40 °C. Don't use this unit at higher ambient temperatures. [. . . ] Switch the unit immediately off when the power cord is squashed or damaged. It must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. Never let the power-cord come into contact with other cables!Cord When the power switch is in OFF position, this unit is not completely disconnected from the mains!This appliance must be earthed to in order comply with safety regulations. In order to prevent electric shock, do not open the cover. Apart from the mains fuse there are no user serviceable parts inside. never repair a fuse or bypass the fuse holder. Always replace a damaged fuse with a fuse of the same type and electrical specifications!In the event of serious operating problems, stop using the appliance and contact your dealer immediately. Please use the original packing when the device is to be transported. Keep the screws for later and remove the connector plate: on the back you will notice a special connector. To disconnect the special connector, press the connector lock and separate the two connectors. The amplifier module uses the same connector as the original connector plate: press the lock and join the 2 connector parts together. Make sure the lock function is on: you should hear a "click". double-check if the connectors are well joined!If not, bad connections could occur due to vibrations. Put the amplifier module in place and use the original screws to fasten the module. FAN & VENTILLATION HOLES: during its operation the amplifier produces heat that must be dissipated. The fans inside the amplifier must be able to evacuate the heat in the most effective way. Therefore is it very important not to cover any of the ventilation openings as this may result in overheating. The LED will turn on when the cabinet is switched on. [. . . ] You can adjust the frequency between 90Hz and 250Hz: perfect to make an active system based on a subwoofer + top cabinet!For most subwoofer applications a crossover point between 90Hz and 150Hz is OK, however while listening and comparing you will easily find the optimal settings for your system. LINE INPUT/OUTPUT: This input accepts both balanced and unbalanced line level signals. The output makes it possible to connect several speaker cabinets to the same line output of a mixer. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE JBSYSTEMS LS-RGB-DMX CONTROL
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual JBSYSTEMS LS-RGB-DMX CONTROL will begin.
