User manual JENOPTIK JD 10.0Z3 SL

[. . . ] Precautions Before using the camera, please ensure that you read and understand the safety precautions described below. Always ensure that the camera is operated correctly. Do not aim the camera directly into the sun or other intense light sources which could damage your eyesight. Do not try to open the case of the camera or attempt to modify this camera in any way. [. . . ] Press the shutter button halfway, the difference between the standard exposure and the selected exposure appears in red. Using the Stabilizer With more sensibility and faster shutter speed to bright up the pictures, effectively prevent blur image caused by hand shack or target movement. 28 Recording Movie Clips 1 2 Turn the power on, and set the camera to the Movie mode ( page 13). Compose the subject on the monitor. Aim the focus area ( ) to the subject that you want to take. The LCD monitor displays the available recording time ( ). 3 Start recording. Press the shutter button ( ) to start recording. Using the zoom button ( ) to adjust the image size. The White Balance is set and locked to the settings of the first frame Caution Sound cannot be recorded while pressing the zoom button. . The digital zoom cannot be used in Movie mode. 4 Finish recording. Press the shutter again to end recording. The camera will stop recording automatically when the memory capacity has been reached. Setting the Movie Size Movie Size and Frame Rate Resolution 848 x 480 640 x 480 320 x 240 30 frames/sec. Lower Quality Frame Rate Higher Quality 29 Recording Audio Clips 1 2 Turn the power on, and set the camera to the Voice REC mode ( page 13). Press the shutter button to start recording. The voices are recorded from the microphone ( ) of the camera. Be careful to avoid touching the microphone while recording. 3 Press the shutter button again to end recording. The camera will stop recording automatically when the memory capacity has been reached. Playing Back Audio Clips 1 2 3 Turn the power on, and set the camera to the PLAYBACK mode ( page 13). or to select the audio Press clip that you want to playback. Start playing back. Press Press to start playing the audio clip. to stop the audio clip, or press again to resume. When audio clip paused, press 30 Recording a Voice Memo You can add a voice memo to the still images after you record it. 1 2 Turn the power on, and set the camera to the PLAYBACK mode ( Press or page 13). to select a still image that you want to add a voice memo. If the image already has the voice memo recorded, the appears on the LCD monitor. The new recording will replace the previous one. 3 4 Open the PLAYBACK menu. Press the MENU button, using four-way control to select Voice Memo ( and press the SET button. Press the SET button to start recording for 30 seconds. Press the SET button again to end recording. [. . . ] The subject was beyond the range within which the camera can focus. Make sure the battery compartment door is securely closed. The card may be defective, use a new card. Hold the camera steady when shooting picture. [. . . ]