User manual JENSEN VOYAGER VCCYL35

[. . . ] Route the infrared sensor wire through the hole, secure the sensor with double-sided sticky tape and connect to the car radio via the 3. 5 mm. [. . . ] Detach remote from base/strap by pressing the release button and pulling up. Remove the two screws on the base that appear when the remote is removed. Position strap around steering wheel, and pull tight. Insert battery (Lithum 2032 3-volt) into remote contol, and reinstall the remote onto the base/strap. Satellite Strap Steering Wheel Remote Control This remote control mounts to the steering wheel and operates the basic functions of the car radio, including volume, tuning, mode, band, satellite and weather band. Power Tuning POWER Mode Volume Sound Adjustment & Menu Operation Auxiliary Input MOD VOL SEL This warranty does not extend to the elimination of externally generated static or noise, to the correction of antenna problems, to costs incurred for removal or reinstallation of the product, or to damage to any tapes, cd's, dvd's, speakers, accessories, or electrical systems. This warranty does not apply to any product or part thereof which, in the opinion of the Company, has been damaged through alteration, improper installation, mishandling, misuse, neglect, or accident. ASA Electronics Corporation www. asaelectronics. com © 2005 ASA Electronics Corporation v. 041205 Tuning Band AUX TUNE/CH VOL Automatically Store AMS Weather Band WB ENTER BAND RPT SCAN Volume T/F 1 Enter SHUF 2 PAUSE 3 6 Display Priority Scan 4 Repeat 5 SAT DISC/CAT Satellite Random Shuffle Track Select Pause Infrared Remote Control This hand-held remote control also operates the basic functions of the car radio. Install the battery (Lithum 2032 3-volt) and infrared sensor (see below) before first use. Limited Warranty (90 Day / 12 Month) AUDIOVOX SPECIALIZED APPLICATIONS, LLC (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 90 days from the date of original purchase, such defect(s) will be repaired or replaced (at the Company's option) without charge for parts and repair labor. After the initial 90 day period and for a period of 12 months from the date of the original purchase, the Company will supply at no charge a replacement for any defective part(s) To obtain repair or replacement within the terms of this warranty, the end user should contact the O. E. M. The product is to be delivered to the OEM or original place of purchase, with proof of warranty coverage (e. g. [. . . ] The product is to be delivered to the OEM or original place of purchase, with proof of warranty coverage (e. g. [. . . ]