User manual JENSEN VOYAGER VOM-7SN

[. . . ] Do not mount radio within close proximity of engine compartment. Use the Proper Power Supply This product is designed to operate with a 12 volt DC negative ground battery system. Protect the Disc Mechanism Avoid inserting any foreign objects into the disc slot. Misuse may cause malfunction or permanent damage due to the precise mechanism of this unit. [. . . ] Treble Level Use the VOLUME buttons to adjust the Treble level range from "-6" to "+6". Use the VOLUME buttons to adjust the Balance between the left and right speakers from "12L" (full left) to "12R" (full right). Fader Use the VOLUME buttons to adjust the Fader between the rear and front speakers from "12R" (full rear) to "12F" (full front). Press the POWER button (1) to turn the unit on or off. Always operate the unit with the front panel door closed. ⷠWhen closing the front panel door, do not apply pressure to the OPEN slide button. ⷠDo not force front panel door operation when opening or closing. Front Panel Door Alarm To prevent damage to the unit by entry of water or debris through the CD opening, the front panel door should only be opened for a short period of time during CD loading or ejecting. If the front panel door is left open for longer than 30 seconds, the current playback audio will mute and a beep tone will sound. Press and hold the AUDIO/MENU button (3) for more than 2 seconds to enter the system menu. Beep Tone (ON/OFF): Turn the audible beep ON/OFF (heard when functions/buttons are selected). Press and hold the AS/PS (14) button for more than 2 seconds to automatically select six strong stations and store them in the current band. The new stations replace any stations already stored in that band. The unit will pause for 5 seconds at each preset station. Press AS/PS again to stop scanning when the desired station is reached. This unit is equipped to display RBDS (Radio Broadcast Data Service) information when broadcast by the radio station. The following LCD indicators appear when data is received: · When flashing, PTY search is in progress. NOTE: Radio stations broadcasting RBDS may not be available in your listening area. Use the VOLUME buttons (2) to move through the list of available categories and select the program type you wish to search. After selecting the desired PTY, press and hold the TUNE/TRK >>| or |<< button (19, 18) to search the band for broadcasts of this type. Press the BAND button (15) to change between three FM bands and two AM (MW) bands. Press and hold the TUNE/TRK >>| or |<< buttons (19, 18) to automatically seek the next or previous strong station. [. . . ] Repeat Play During playback, press the 3/RPT button (5) to repeat the current song. Press 3/RPT again to stop repeat playback. random Play During playback , press the 4/RDM button (7) to play all songs in the current category in random order. Random play will begin once the current song has finished playing. [. . . ]