User manual JENSEN JCR-255

[. . . ] MODEL JCR-255 AM/FM DUAL ALARM AUTO TIME SET CLOCK RADIO INSTRUCTION MANUAL Please read and follow this instruction manual carefully before using the unit and retain it for future reference DEAR JENSEN ® CUSTOMER Selecting fine audio equipment such as the unit you've just purchased is only the start of your musical enjoyment. Now it's time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association's Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion and, most importantly, without affecting your sensitive hearing. [. . . ] Open the battery compartment door on the bottom of the cabinet. Insert 2 "AA" size batteries into the battery compartment according to the polarity diagram engraved inside the compartment. IMPORTANT: Be sure that the batteries are installed correctly. Alkaline-type batteries are recommended. For optimum performance, these batteries should be replaced after every year or when batteries become exhausted. Old or leaking battery can cause damage to the unit and will void the warranty. Use only the size and type of batteries specified. Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickelcadmium) batteries. Do not try to recharge batteries not intended to be recharged; they can overheat, rupture and leak. (Follow battery manufacturer's directions). Do not dispose of batteries in fire, batteries may leak or explode. POWER FAILURE INDICATOR If there are no batteries installed in the unit or if the batteries installed are weak or dead, the time and alarm settings will be lost if the AC power is interrupted. When the AC power is restored the display will blink"12:00". This indicates that the time displayed is incorrect and needs to be reset. IMPORTANT: After you reset the time, be sure to reset your alarm settings as well. 5 2 4 3 5 6 9 13 1 7 8 14 10 11 12 15 1. BATTERY COMPARMENT 6 1 3 4 2 5 6 1. SPEAKER 7 AUTO TIME SET This unit features an Automatic Time Set system powered by 2 X "AA" batteries (3V DC) (Included), so you do not need to set the clock time when first plugged in. After the unit is plugged in, the LED display will show the current time automatically after you set the time zone and daylight saving time for desired area. SETTING THE TIME ZONE Change to your time zone area by sliding the TIME ZONE switch on the back of the unit to the appropriate time zone you live in. The default time zone is set to Eastern Standard Time (EST). Please refer to the time zone map below when setting the switch position on the back. Eastern Standard Time (EST) Central Standard Time (CST) Mountain Standard Time (MST) Pacific Standard Time (PST) PST MST CST EST DAYLIGHT SAVING TIME Slide the DST (Daylight Saving Time) switch on back of the unit to turn Daylight saving time on/off. The clock comes with DST in the ON position as the default. [. . . ] Press the SNOOZE button again to confirm. When the ALARM sounds, press the SNOOZE button to pause the ALARM. The ALARM will come again after your pre-set SNOOZE time is reached. When the Snooze time starts, press the SNOOZE button again to check remaining time left. [. . . ]